Primacoustic EcoScapes Slat Wall Manual

Primacoustic Ikke kategoriseret EcoScapes Slat Wall

Læs gratis den danske manual til Primacoustic EcoScapes Slat Wall (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Primacoustic EcoScapes Slat Wall, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
Slat Wall
Wood Veneer Finish PET Acoustic Pan
Installation Manual
Congratulations on purchasing your new EcoScapes
Slat Wall panels from Primacoustic. These high
performance PET Acoustic Panels will absorb ambient
noise and control excess reverberation and echo. The
stylish slat wall design also helps diuse sound
energy, giving the room a sense of air and space.
Please take a few minutes to read this installation
manual before beginning, to familiarize yourself with
the various installation options and the tools required.
Please refer to www.primacoustic.com for general
room acoustics information and further details.
Should you have any questions or comments, we
invite you to send an email to info@primacoustic.com.
Installation Instructions
Fire Rating
The acoustic felt backing carries a class A/1 re rating
following certication ASTM E84.0
Wall Preparation
Before beginning the installation process, ensure that
the surface is clean (free of any dust, aking paint,
loose debris or grime), structurally sound, dry and free
of imperfections.
Care & Maintenance
Start by removing the protective lm over the slats
pieces. We recommend adding a protective nish to the
panels if possible. Something like wood oil is perfect as
it protects and keeps the natural look and feel of the
wood. Once this is applied, light dusting or vacuuming
will prevent any dust build-up. If you choose to keep the
panels without a nish, then a dry cloth is suitable for
wiping the panels down.
Tel: 604-942-1001 Fax: 604-942-1010 info@primacoustic.com
www.primacoustic.com
Box Contents:
Slat Wall Panels
31.7" x 98.4" x 0.8"
(806mm x 2,500mm x 21mm)
2x
CAUTION: The wood slats are precision
cut, which may leave sharp edges. Gloves
are highly recommended during installation.
Cutting the Panels
Your installation may require you to cut the panels to
t them around outlets, vents, pipes or other obstacles.
When cutting and tting panels, consider which areas of
the surface will contain the cut portions and try to apply
the products as symmetrically as possible. It may help
to measure and mark the space beforehand.
We recommend a sharp ne tooth saw or oscillating
cutting tool to cut through the slats and felt widthways.
A utility knife can be used to cut through the felt
lengthways.
Once you’ve cut a section away from of a panel, you may
nd you need to reinforce the connection between the
PET panel and the wooden slats. We recommend braid
nails or staples for this.
Fig. A
Construction
Adhesive
How To Install EcoScapes Slat Wall
There are three dierent options for installing EcoScapes Slat Wall:
Tel: 604-942-1001 Fax: 604-942-1010 info@primacoustic.com
www.primacoustic.com
INSTALLATION MANUAL EcoScapes Slat Wall Acoustic Panels
Tools & materials required:
• Utility Knife
• or Circular Saw/
Band Saw
• Straight Edge Guide
• Measuring Tape
• Braid Nails/Staples
(if required)
Tools & materials required:
• Clean Gloves
• Measuring Tape
• Ladder/Scaolding
• Caulking Gun
• Construction
Adhesive
(for permanent installation)
• or Silicone Adhesive
(for semi-permanent
installation)
• Drill/Screwdriver
• DryWall Screws
• Anchors
(for ceiling installation)
3. Adhere the panel to the wall, making sure the
panel’s weight is supported while the adhesive
dries (refer to the adhesive’s instructions for
timing). We recommend using a few drywall screws
in addition to the adhesive, to hold the panel in
place during drying.
If installing onto ceilings, fasten the panel into the
ceiling joists with drywall screws in addition to
the adhesive.
Method 1. Gluing straight onto the wall:
We recommend using a construction adhesive for
a permanent installation or silicone adhesive for a
semi-permanent installation.
1. Clean and prepare the wall surface (see page 1).
2. Spread the adhesive on the reverse of the panel (see
Figure A), leaving 2" (51mm) space around the edges.

Produkt Specifikationer

Mærke: Primacoustic
Kategori: Ikke kategoriseret
Model: EcoScapes Slat Wall

Har du brug for hjælp?

Hvis du har brug for hjælp til Primacoustic EcoScapes Slat Wall stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Primacoustic Manualer

Primacoustic

Primacoustic Saturna LP Manual

6 Juli 2025
Primacoustic

Primacoustic EcoScapes Slat Wall Manual

26 Januar 2025
Primacoustic

Primacoustic London 10 Manual

6 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rowenta

Rowenta Gourmet OC3751 Manual

14 August 2025
Renkforce

Renkforce RF-HSA-200 Manual

14 August 2025
American Audio

American Audio Gobo Flash 4 Manual

14 August 2025
Candy

Candy CIS633CMTTWIFI Manual

14 August 2025
EnGenius

EnGenius ECW536 Manual

14 August 2025
Master

Master TH 5 Manual

14 August 2025
Hisense

Hisense HRCF200 Manual

14 August 2025
American Audio

American Audio DJ Spot LED Manual

14 August 2025
American Audio

American Audio CDG-350 Manual

14 August 2025
Tefal

Tefal Inicio FV1243 Manual

14 August 2025