Privileg PV2UC10BS7A0S Manual

Privileg Opvaskemaskine PV2UC10BS7A0S

Læs gratis den danske manual til Privileg PV2UC10BS7A0S (8 sider) i kategorien Opvaskemaskine. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Privileg PV2UC10BS7A0S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENQuick Guide

CONTROL PANEL

PROGRAMS TABLE

Pro-

gram

Programs description

Drying

phase

Auto

Door

Available

options

Duration

of wash

program

(h:min)

**)

Water

con-

sumption

(litres/cycle)

Energy

con-

sumption

(kWh/cycle)

Eco 50°- Program is suitable to clean normally soiled tableware, that for this

use, it is the most ecient programme in terms of its combined energy and

water consumption, and that it is used to assess compliance with the EU

Ecodesign legislation.

3:35 8.7 0.59

Auto Intensive 65°- Automatic program for heavily soiled dishes and pans

(not to be used for delicate items).

2:00 - 3:10 14.0 - 17.0 1.50 - 1.85

Auto Mixed -55° Automatic program for normally soiled pans and dishes.

1:20 - 3:00 7.0 - 14.0 0.70 - 1.10

Glass - 45° Program for delicate items, which are more sensitive to high tem-

peratures, for example glasses and cups.

1:40 12.0 1.20

Rapid 30’ 45° - Program to be used for half load of lightly-soiled dishes with no

dried food residues. Without drying.

0:30 9.0 0.50

Extra Hygiene 65° -- Normally or heavily soiled crockery, with additional antibac

terial wash. Can be used to perform maintenance of the dishwasher.

1:50 12.0 1.30

Extra - 50° Program that allows to wash very big items loaded in the lower

rack. Please apply detergent directly to tub instead of detergent dispenser.

Upper rack should be removed with this cycle.

1:30 11.0 1.20

Pre-Wash - Use to refresh crockery planned to be washed later. No detergent

to be used with this program.

- -

0:10 4.5 0.01

Push&GO 50° - Everyday wash and dry cycle that ensures great cleaning per-

formance in a short time without the need to pre-treat dishes.

1:25 11.5 1.10

1. On-O / Reset button with indicator light

2. Program selection button with indicator

light

3. Half Load button with indicator light /

Tablet (Tab)

4. Eco program indicator light

5. Display

6. Program number and remaining time

indicator

965 7 8 1210 1311

7. Tablet (Tab) indicator light

8. Closed water tap indicator

light

9. Rinse Aid rell indicator light

10. Salt rell indicator light

11. Push&GO button with

indicator light

12. Delay button with indicator light

13. Start/Pause button with indicator light / Drain out

PLEASE SCAN THE

QR CODE ON YOUR

APPLIANCE IN

ORDER TO HAVE

MORE DETAILED

INFORMATION

Before using the appliance carefully read Safety and Installation Instructions.

After installation, please remember to remove all transport protection parts from

the dishwasher.

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and on

the machine’s functional components.

• It is mandatory that the salt reservoir never be empty.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher and must be

lled when the SALT REFILL indicator light in the control panel is lit.

1. Remove the lower rack and unscrew the reservoir cap

(anticlockwise).

2. Position the funnel and ll the salt reservoir (see gure)

right up to its edge (approximately 1 kg); it is not unu-

sual for a little water to leak out.

3. Only the rst time you do this: ll the salt reservoir

with water.

4. Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get into

the container during the wash program (this could damage the water

softener beyond repair).

Whenever you need to add salt, it is mandatory to complete the proce-

dure before the beginning of the washing cycle to avoid corrosion.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently pre-

venting scale buildup on heater, contributing also to better cleaning e-

ciency. This system regenerates itself with salt, therefore it is required

to rell salt container when empty.

Frequency of regeneration depends on water hardness level setting - regen-

eration takes place once per 6 Eco cycles with water hardness level set to 3.

Regeneration process starts in nal rinse and nishes in drying phase, be-

fore cycle ends.

• Single regeneration consumes: ~3.5L of water;

• Takes up to 5 additional minutes for the cycle;

• Consumes below 0.005kWh of energy.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid

dispenser A should be lled when the RINSE AID

REFILL indicator light in the control panel is lit.

NEVER pour the rinse aid directly into the

appliance tub.

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device . Introduce the C

detergent into the dry dispenser only. Place the amount of detergent for D

pre-washing directly inside the tub.

If all-in-one detergents are used, we recommend using the TABLET button,

because it adjusts the program so that the best washing and drying results

are always achieved.

Usage of detergent not designed for dishwashers may cause

malfunction or damage to the appliance.

FIRST TIME USE

More information in the Daily Reference Guide on website

Quick Guide

DELAY - The start of the program may be delayed for a period of time

between and hours.0:30 24

The DELAY function cannot be set once a wash cycle has been started.

TABLET (Tab) - If you use powder or liquid detergent, this option

should be o.

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected

program (see PROGRAMS TABLE), the corresponding LED ashes rapidly 3 times and beeps will sound. The option will not be enabled.

Please scan on your product in order to have more detailed information. the QR code

PUSH&GO - button is an easily distinguishable button that allows you

direct access to the Push&GO program, a wash and dry cycle that

ensures great cleaning performance in a short time. You don’t have to worry

which program to choose, Push&GO cycle will do the work for you.

EXTRA - makes it possible to carry out a heavy-duty wash cycle of

large crockery up to a max height of 53cm. baking pans, oven grids,

dripping pans, hob grids, large saucepans, serving dishes, pizza dishes,

stainless-steel hood lters. Remove the upper rack to load bulky crockery.

Release the two locks (right and left) and pull out the rack.

When the upper rack is tted, the locks must be always

closed.

In order for the water to reach the crockery everywhere,

arrange it as shown in the Figure.

Do not start the dishwasher without the upper rack

using wash cycles other than EXTRA.

To carry out the wash cycle Extra pour the detergent

DIRECTLY INTO THE TUB and not into the dispenser.

HALF LOAD using the upper or lower rack - If there are not many

dishes to be washed, a half load cycle may be used in order to save

water, electricity and detergent. Remember to load the upper or lower

rack only, and to reduce the amount of detergent accordingly.

More information in the Daily Reference Guide on website.

CLEANING AND MAINTENANCE

LOADING THE RACKS

CAPACITY: 10 standard place-settings

CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS

In case you nd foreign objects (such as broken glass, porcelain, bones, fruit seeds

etc.) please remove them carefully .

NEVER REMOVE the wash-cycle pump protection (black detail) .(Fig 4)

To remove the upper spray

arm, turn the plastic locking

ring in a clockwise direction.

The lower spray arm may

be removed by pulling

it upwards.

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.

Note for Test Laboratories: For information on

comparative EN testing conditions, please send an email to the following address:

dw_test_support@europeanappliances.com

Pre-treatment of the dishes is not needed before any of the programs.

*) Not all options can be used simultaneously.

**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and

pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-

bration. The sensor calibration can increase program duration up to 20 min.

Auto Door is a convection drying system which automatically opens