Projecta IDC45 Manual

Projecta Batterioplader IDC45

Læs gratis den danske manual til Projecta IDC45 (16 sider) i kategorien Batterioplader. Denne vejledning er vurderet som hjælpsom af 62 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 31.5 anmeldelser. Har du et spørgsmål om Projecta IDC45, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
45 Amp, 3 Stage Switchmode
INTELLI-CHARGE
DC/SOLAR BATTERY CHARGER
P/No. IDC45
2
WARNINGS
• Explosive gases may escape from the battery during charging.
Prevent flames and sparks and provide adequate ventilation.
• Before charging, read the instructions.
• FOR CHARGING 12 VOLT LEAD ACID BATTERIES ONLY.
• Do not attempt to charge non-rechargeable batteries.
• Never charge a frozen battery.
• Corrosive substances may escape from the battery during charging and damage
delicate surfaces. Store and charge in a suitable area.
• This appliance is not intended for use by young children or infirm persons unless they
have been adequately supervised by a responsible person to ensure that they can use
the appliance safely.
• Fit fuses as close to the batteries as possible to protect the cable in case of
short circuit.
FEATURES
The IDC45 DC-DC charger is purposely designed for charging auxiliary batteries.
It includes all the features needed to maintain the auxiliary battery to its optimum
condition and to prolong the battery life.
SWITCHMODE TECHNOLOGY
The IDC45 converts your vehicle’s 12VDC/24VDC alternator power to the voltage
level allowing your batteries to be fully charged, prolonging battery life and
reliability. With the latest synchronous switching technology, efficiency of IDC45
exceeds 94% at typical full load condition.
DUAL INPUT OPERATION
Allows two energy sources to power the IDC45 simultaneously. Solar input takes
precedence if solar and alternator inputs are present. When solar input cannot provide
enough energy to the load, the IDC45 will draw power from solar and alternator
simultaneously.
SOLAR MPPT
The IDC45 utilises sophisticated MPPT (Maximum Power Point Tracking) solar
regulator technology. MPPT maximises the power generated from the solar panels
to the auxiliary battery.

Produkt Specifikationer

Mærke: Projecta
Kategori: Batterioplader
Model: IDC45

Har du brug for hjælp?

Hvis du har brug for hjælp til Projecta IDC45 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Batterioplader Projecta Manualer

Projecta

Projecta IC2500W Manual

15 September 2024
Projecta

Projecta BLT700 Manual

12 September 2024
Projecta

Projecta PC2100 Manual

1 September 2024
Projecta

Projecta IC1500 Manual

30 Juli 2024
Projecta

Projecta AC250B Manual

29 Juli 2024
Projecta

Projecta IDC45 Manual

27 Juli 2024
Projecta

Projecta IC5000L Manual

22 Juli 2024
Projecta

Projecta AC400 Manual

19 Juli 2024
Projecta

Projecta IC1000 Manual

19 Juli 2024
Projecta

Projecta AC1000 Manual

13 Juli 2024

Batterioplader Manualer

Nyeste Batterioplader Manualer

Graphite

Graphite 58G002-1 Manual

14 Juni 2025
Champion

Champion 100594 Manual

14 Juni 2025
Schwaiger

Schwaiger LPBC0500 Manual

14 Juni 2025
Champion

Champion 100593 Manual

14 Juni 2025
Graphite

Graphite 58G085-1 Manual

13 Juni 2025
Venom

Venom VS2872 Manual

9 Juni 2025
Stalco

Stalco Perfect BCP60-8ACS Manual

9 Juni 2025
Stalco

Stalco Perfect BCP60-5.5A Manual

8 Juni 2025
Xline

Xline CC702 Manual

8 Juni 2025
Draper

Draper D20 92239 Manual

8 Juni 2025