Prologue 36-3695 Manual

Prologue Ur 36-3695

Læs gratis den danske manual til Prologue 36-3695 (5 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Prologue 36-3695, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

GREAT BRITAIN • CUSTOMER SERVICE tel: 08545 300 9799

e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk

20131024

I2:3540

LIGHT

Backlight

ST./STP.

LAP/RESET

Stopwatch:

Start/stop/lap

MODE

Product description

Digital wristwatch with alarm, date, stopwatch with split-time and

backlight. Water resistant to 5 ATM.

Buttons

Display

• Normal mode: Hours, minutes, seconds, day.

• Hold in [ST./STP] to display the day, month and date.

• Hold in [LAP/RESET] to display the alarm time in hours and minutes.

• Press [MODE] to switch between normal and stopwatch mode.

Backlight

The backlight illuminates the face, which makes the digits easy to read

in the dark. Press [LIGHT] whenever you need the backlight. The display

lights up for about 4 seconds.

Activating/deactivating the alarm

and hour chime

In normal display mode:

• Hold in [LAP/RESET] and press [ST./STP.] once to activate the chime.

• Hold in [LAP/RESET] and press [ST./STP.] once to activate the alarm.

• Hold in [LAP/RESET] and press [ST./STP.] once to deactivate

the hourly chime.

• Hold in [LAP/RESET] and press [ST./STP.] once to deactivate the alarm.

• The display returns to normal mode when you release [LAP/RESET].

Stopwatch

In normal display mode:

Press [MODE] once in order to activate the stopwatch.

• Press [ST./STP.] to start/stop the stopwatch. Start/Stop:

The time is measured in 1/100 second increments.

• Press [LAP/RESET] (when stopwatch is active) once Split time:

to display the split time. Time will continue to be taken while

the split time is displayed. Press [LAP/RESET] once to display

the total running time.

• Press [ST./STP.] to stop the stopwatch and then press Reset to 0:

[LAP/RESET] to reset back to zero.

Setting the alarm

In normal display mode:

1. Hold in [MODE] for approx. 3 seconds. “MON” and the hour display

will begin to ﬂash. Set the desired hour by pressing [LAP/RESET]

until you reach the desired hour.

2. Press [ST./STP], “MON” and the minute display will begin to ﬂash.

Press [LAP/RESET] the number of times required to set

the desired minutes.

3. Press [MODE] to exit alarm settings and return to normal display mode.

Setting the time

In normal display mode:

1. Hold in [MODE] for approx. 3 seconds. Press [MODE] once.

“TUE” and the seconds display will begin to ﬂash.

Press [LAP/RESET] once to reset the seconds display.

2. Press [ST./STP.] once and the minutes display will begin to ﬂash.

Press [LAP/RESET] the required number of times to set

the desired minutes.

3. Press [ST./STP.] once and the hours display will begin to ﬂash. Press

[LAP/RESET] the required number of times to set the desired hours.

4. Press [ST./STP.] once and the month display will begin to ﬂash.

Press [LAP/RESET] the required number of times to set

the desired month.

5. Press [ST./STP.] once and the day display will begin to ﬂash. Press

[LAP/RESET] the required number of times to set the desired day.

6. Press [MODE] to exit and return to normal display mode.

12/24 hour display

In normal display mode:

Hold in [LAP/RESET] and press [MODE] once to switch display mode.

• “A” or “P” is shown after the time on the 12-hour display.

• “A” or “P” is not shown in the 24-hour display.

Displaying the alarm setting

In normal display mode:

Press [ST./STP.] and [LAP/RESET] simultaneously to display

the set alarm time.

Turning off the alarm

Press [LAP/RESET] to turn of the alarm.

Displaying the month and date

In normal display mode:

Hold in [ST./STP.] and press [LAP/RESET] to switch display mode

between date/month or month/date.

Care and maintenance

• Never try to open the casing.

• Do not press the buttons when the watch is under water.

• Moisture in the watch can cause damage to its metal parts.

Contact Customer Services if you notice moisture on the inside

of the glass.

• The watch can withstand some rough treatment, but do not

expose it to unnecessary knocks or blows.

• Do not expose the watch to extreme temperatures.

• Clean the watch using a dry, soft cloth. Avoid strong detergents

since they can damage the plastic parts of the watch.

• Avoid wearing the watch in the vicinity of strong electro-magnetic ﬁelds.

Disposal

Follow local ordinances when disposing of this product. If you are unsure

of how to dispose of this product, please contact your municipality.

Specifications

Diameter 42 mm

Batteries CR2025

Wristwatch

Art.no 36-3695

Please read the entire instruction manual before using the product and save it for future reference. We reserve the right for any errors in text or images