ProMaster PRO7599 Manual

ProMaster Fjernbetjening PRO7599

Læs gratis den danske manual til ProMaster PRO7599 (2 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om ProMaster PRO7599, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Replaces Canon RC-1/RC-3/RC-5/RC-6 Infrared Remote Control

OPERATING INSTRUCTIONS

IMPORTANT NOTICE

Your ProMaster Remote Control features a POWER SAVE mode. Please observe the following to ensure

proper operation:

1. After initially installing the battery or changing the battery, press and hold the shutter release

button for at least 2 seconds to activate the remote.

2. The remote will enter the POWER SAVE mode after 8 minutes of inactivity. To wake the remote

from the POWER SAVE mode and activate it for use, press and hold the shutter release button for

at least 2 seconds.

To use the ProMaster Infrared Remote Control for Canon

Upper Controls of Remote (For SLR Camera)

S button for camera instant shutter.

2S button for 2seconds delay shutter.

Lower Controls of Remote(For PowerShot Camera)

S button for camera instant shutter.

W/T controls Canon PowerShot zoom

1. Before using the remote for the first time, install the CR2025 battery (included).

2. Mount the camera on a tripod (recommended) or place the camera on a stable, level surface.

3. Set your camera for delayed remote or quick response remote per the instructions provided with

your camera.

4. Aim the remote control at the infrared receiver on the camera (usually within +/- 20 degree of the

lens axis, from the left to the right and from the top to the bottom) and press the shutter-release

button on the remote control. When using the remote outdoors, make sure that the subject is not

backlit and that the line of site between the transmitter and the infrared receiver is not blocked by

the lens or other obstacles.

5. How the camera focuses and shoots depends upon the options selected for your camera. For

further information, check your camera's instruction manual.

6. Infrared cannot be seen by human eyes so you will see no visible light from the LED on the front

of the remote control during operation.

Produkt Specifikationer

Mærke:	ProMaster
Kategori:	Fjernbetjening
Model:	PRO7599

Har du brug for hjælp?

Hvis du har brug for hjælp til ProMaster PRO7599 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Fjernbetjening ProMaster Manualer

ProMaster PRO5439 Manual

29 September 2025

ProMaster PRO7599 Manual

29 September 2025

ProMaster PRO1782 Manual

29 September 2025

ProMaster PRO7337 Manual

29 September 2025

ProMaster PRO7606 Manual

29 September 2025

ProMaster Timer Remote Manual

10 November 2022

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

Danfoss MPCAN Manual

10 November 2025

Vivanco RC-21966 Manual

9 November 2025

SmallRig Wireless Remote Controller 3902 Manual

3 November 2025

Abus Comfion FUBE80000 Manual

31 Oktober 2025

Abus Smartvest Pro FUBE45010 Manual

30 Oktober 2025

Philips SRU3030/10 Manual

28 Oktober 2025

Rotel RKP-200 Manual

15 Oktober 2025

One For All URC 4916 Manual

8 Oktober 2025

Fusion MS-ARX70B Manual

6 Oktober 2025

APart DIWAC Manual

5 Oktober 2025