Proteus BC-81090 Monitor Manual

Proteus motionscykel BC-81090 Monitor

Læs gratis den danske manual til Proteus BC-81090 Monitor (4 sider) i kategorien motionscykel. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Proteus BC-81090 Monitor, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

PROGRAMMABLE MAGNETIC EXERBIKE

MONITOR BC-81090 WITH LCD DISPLAY

SUMMARY:

This system is designed for programmable magnetic bike. There are 3 parts to this system the monitor

(BC-81090), motor & controller and magnetic braking system.

A. Power up :

1. Before all, you should connect the connection cables with monitor together.

2. The power supplier to the monitor is 6V/500mA. Please make sure the output of the adaptor is

correct.

3. After power up, all LCD segments will light up for 2 seconds & CPU will be reset the resistance

into level 1. And then the system goes to the clock and date setting mode. After finished the clock

and date setting or without setting any value after 20 seconds, the monitor will goes into the

initial mode. The displays will be shown as fig. 2.

**REMARK: DO NOT CONNECT ANY ( AC, DC ) POWER SUPPLY

BEFORE COMPLETELY ASSEMBLED

1. If the connection cables were installed incorrectly, monitor will display “E1” on matrix display

and generate a beep sound. To release the beep sound, please press “ START / PAUSE (Hold to

reset) “ button or take off the adaptor. Before asking service, please examine if all connection

cables are well connected, and without broken.

2. Using a period of time, if the power source can’t drive the motor and controller smoothly, the

monitor will display a sign of “E1”. Unplug the adaptor and wait for 15 seconds, and then reinstall

the plug of adaptor. If the monitor still shows “E1” and beeps, please call service man.

3. If the monitor shows “ E2 ”message, please call service man.

B. Clock and Date Setting:

1. After power on the monitor, the top of the LCD will display “ PM 12:00 00 01D01M03Y” and the

hour display will flash.

2. Press ♁ or \ button to set up the hour value and then press the ENTER button to confirm

your setting value.

3. Minute display will flash. Press ♁ or \ button to set up the minute value and then press the

ENTER button to confirm your setting value.

4. The Letter of E will flash. It is means the language is English. Press ♁ or \ button to choose

the language you prefer to use. E means English; D means German; F means French; I means

Italian; S means Spanish; A means USA. The indication of date is Month-Day-Year in USA and

the others are Day-Month-Year.

5. The year display will flash. Press ♁ or \ button to set up the year value and then press the

ENTER button to confirm your setting value.

6. The month display will flash. Press ♁ or \ button to set up the month value and then press

the ENTER button to confirm your setting value.

7. The day display will flash. Press ♁ or \ button to set up the day value and then press the

ENTER button to confirm your setting value.

8. The display will go to the program 1.

Note:

If you would like to set alarm, cancel alarm or change clock and date setting, press the ♁ or \

button in the stop mode and go to the clock setting program. This program is located behind of the

program 12 and the window will show SET.

a. Hold the START/PAUSE button two seconds to enter the alarm setting. The operating

procedure is same as the clock setting above.

b. Press the START/ PAUSE to choose with alarm or without alarm function. With alarm

function, the window will display the bell picture. Without alarm function, the bell picture will

disappear from the window.

c. Hold the ENTER button two seconds to enter the clock and date modify function. The

operating procedure is same as the clock above.

Note: When take off the adaptor will clear the data of clock and date.

C. KEY BOARD:

1. MODE : Change the display of Speed & Cal. Functions to RPM & Performance value functions,

and keep the other functions as the same.

2. ENTER : During PAUSE mode, press ENTER key to enter Time or Age setting (only in 11th &

12th program).

3. START/PAUSE : To start or pause exercising.

Hold this button for 2 seconds can enter initial mode & reset all value to zero.

4. ♁ : Selects Program or sets up the values of load level, time and age. Or set up the values of

clock, date and alarm.

5. \ : Selects Program or sets down the values of load level, time and age. Or set up the values of

clock, date and alarm.

D. FUNCTION OF OPERATION:

This system contains of 12 different programs and you can preset the workout time and system will

divide the time by 10 intervals. If you don’t preset workout time, system will cont up the workout

time in one-second increment. Without setting the workout time, the time will count up and each

interval will retain 3 minutes.

1. DETAIL OPERATION OF PROGRAM 1ST ~ PROGRAM 10TH

a. To enter the initial mode, press the START/STOP key for over 2 seconds.

b. Then press ♁ or \ key to choice the exercise program you prefer. The profile will be

Produkt Specifikationer

Mærke:	Proteus
Kategori:	motionscykel
Model:	BC-81090 Monitor

Har du brug for hjælp?

Hvis du har brug for hjælp til Proteus BC-81090 Monitor stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

motionscykel Proteus Manualer

Proteus MTM-7500 -2003 Manual

22 August 2024

Proteus CBM-1050 Manual

21 August 2024

Proteus PEC-2200 Manual

21 August 2024

Proteus Pec1915 Manual

21 August 2024

Proteus PEC-3250 Manual

21 August 2024

Proteus PAR-5500 Manual

21 August 2024

Proteus PEC-4950 Manual

20 August 2024

Proteus PEC-3200 Manual

20 August 2024

Proteus BC-81090 Monitor Manual

20 August 2024

Proteus PEC-4688 Manual

20 August 2024

motionscykel Manualer

Nyeste motionscykel Manualer

Toorx WBX-65 Manual

9 April 2025

Toorx BRX 300 Ergo Manual

9 April 2025

LifeSpan TR1200B Manual

30 Januar 2025

Schwinn 470i Manual

12 Januar 2025

Schwinn AD2 Manual

12 Januar 2025

VirtuFit Power Tower Manual

12 Januar 2025

VirtuFit Power Tower Deluxe Manual

12 Januar 2025

Finnlo Roton Stressless 3166 Manual

11 Januar 2025

Cardiostrong IB50 Manual

5 Januar 2025

Taurus Air Bke Manual

5 Januar 2025