Pure Acoustics Lord Manual

Pure Acoustics Højttaler Lord

Læs gratis den danske manual til Pure Acoustics Lord (3 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Pure Acoustics Lord, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Introduction

Thank you for purchasing Pure Acoustics’ products, and welcome to the Pure Acoustics family of satisfied customers!

Pure Acoustics was established to fulll the need for high quality speakers of exceptional design at an affordable price. After

years of research and development, and by manufacturing all parts ourselves from the voice-coil to the uniquely-designed --

crossover Pure Acoustics is able to offer you speakers of superior value. --

Each speaker component has been designed and engineered with first-rate materials to produce exceptional sound. Our speakers

offer the best of it all – high-quality sound, hand-made solid construction, and a remarkably stylish appearance.

We welcome you to witness the results. Our team’s dedication to quality, reliability and attractive design has created some of the

best-value speakers you can find today.

Reading the complete manual will help you to set up your speakers properly and reward you with a fine listening experience.

Pure Acoustics distribution centers in Europe, Asia, Australia and the Americas will be happy to assist you with any questions you

may have. Please look for the distributor nearest you on our web site, www.pure-acoustics.com.

Connections

Carefully unpack the loudspeakers and retain the carton and packing materials for future use. Please ensure that all system components

are turned off prior to making any connections. Make sure that your amplifier speaker’s definition is set to SMALL and the

subwoofer definition is YES. Turn all equipment off. when connecting the speakers;, be sure to retain the correct polarity. Most

speaker cables will have (+) red sign for positive and (-) black sign for negative.

Front speakers: Connect the speaker le to the positive (+) front-left speaker terminal on the amplifier and to the positive (+) cab

terminal on the front-left speaker. Connect the speaker cable to the negative (-) front-left speaker terminal on the amplifier and to

the negative (-) terminal on the front left speaker. Repeat the same step for the right-side front speaker. This method can be

applied to bi-wire terminals as long as the shorting straps are in place. If your amplifier is equipped with bi-wire output

connection, remove the shorting straps and connect each terminal to the associated terminal in your amplifier.

Center speaker: Connect the speaker cable to the positive (+) center speaker terminal on the amplifier and to the positive (+)

terminal on the center speaker. Connect the speaker cable to the negative (-) center speaker terminal on the amp and to the

negative (-) terminal on the center speaker.

Rear speakers: Connect the speaker cable to the positive (+) rear left speaker terminal on the amplifier and to the positive (+)

terminal on the rear-left speaker. Connect the speaker cable to the negative (-) rear-left speaker terminal on the amplifier and to

the negative (-) terminal on the rear-left speaker. Repeat the same step for the right-side rear speaker.

Subwoofer connections (low-level): Connect a single RCA to RCA cable between the subwoofer input terminal and your amplifier’s

subwoofer output terminal. Make sure the subwoofer switch is in the OFF position, rotate the GAIN control to MIN and set the FREQ

control to the middle position. Plug in the AC power cord to your electrical outlet. Turn on your amplifier and subwoofer and play

your favorite music. Gradually increase your amplifier’s volume to your desired level. Gradually increase your subwoofer GAIN

level to your desired bass level. Adjust the FREQ control to a point where the subwoofer and rear speakers perform to your satisfaction.

Subwoofer -level connection: hi (Use this connection when you don’t have Subwoofer out at the back of the receiver). Connect a speaker

wire from the amplier left speaker terminal to your subwoofer’ left input terminal. Connect another speaker wire from the amplifier’s

right speaker terminal to your subwoofer’s right input terminal. Connect the speaker cable to the positive (+) output-left speaker

terminal on the subwoofer and to the positive (+) terminal on the front-left speaker. Connect the speaker cable to the negative (-)

output-left speaker terminal on the subwoofer and to the negative (-) terminal on the front left speaker. Repeat the same step for

the right-side front speaker.

Toggle the PHASE switch between the REV and NOR positions to see which one sounds better to you. These adjustments are used to

match the subwoofer bass reproduction with that of your main speakers. You can now leave the AUTO/ON/OFF switch in the AUTO

position. This position is voice-activated; your subwoofer will switch on automatically only when the subwoofer receives an audio

signal from your amplifier.

For optimal results, try a few different types of music.

Position

The front speakers should be placed on each side of your TV or in front of your favorite listening position. As a general

guideline, the space from the speakers to the listening position should be 1.5 times the distance between the speakers. For

example, if your listening position is 9ft (2.7m) away from the speakers, the distance between the speakers should be 6ft (1.8m)

The center channel speaker should be on top of or just above your TV.

The rear (surround) speakers should be positioned either to the side of, or behind, your listening position. Typical placement is

on the side walls, slightly above ear level, about two-thirds of the way back from the front of the room. This allows the surround

speakers to aim directly at the listener, placing you in the middle of a five-speaker sound field.

The subwoofer can be positioned anywhere in the room; for the best result, position it between the rear speakers or within 15ft (5m) of

the main speakers. It is best to try the subwoofer in a few places around the room and check which one gives you the best listening

experience. To avoid unnecessary vibrations, place the subwoofer on a solid surface.

Produkt Specifikationer

Mærke:	Pure Acoustics
Kategori:	Højttaler
Model:	Lord

Har du brug for hjælp?

Hvis du har brug for hjælp til Pure Acoustics Lord stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Pure Acoustics Manualer

Pure Acoustics PSX-15400 Manual

8 December 2024

Pure Acoustics Supernova S Manual

8 December 2024

Pure Acoustics Supernova C Manual

8 December 2024

Pure Acoustics Supernova 8F Manual

8 December 2024

Pure Acoustics Class-100 Manual

8 December 2024

Pure Acoustics Calisto Manual

8 December 2024

Pure Acoustics RDW-075 Manual

8 December 2024

Pure Acoustics Dream Tower-101 Manual

8 December 2024

Pure Acoustics Dream Tower-100 Manual

8 December 2024

Pure Acoustics NRX-445 Manual

26 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Sogo SS-8590 Manual

17 Juni 2025

Sogo SS-8790 Manual

17 Juni 2025

DS18 Hydro NXL-8M Manual

17 Juni 2025

Earthquake Sound PR-EQ5S8 Manual

17 Juni 2025

Sogo SS-8780 Manual

17 Juni 2025

DS18 PRO-X6.4BMRGB Manual

17 Juni 2025

DS18 PRO-X4.4BMSL Manual

17 Juni 2025

DS18 PRO-FU12.8 Manual

17 Juni 2025

DS18 GEN-X G4.6Xi Manual

17 Juni 2025

DS18 JL-SBAR.HT Manual

17 Juni 2025