Pyle Cycle PLMCA90 Manual

Pyle Højttaler Cycle PLMCA90

Læs gratis den danske manual til Pyle Cycle PLMCA90 (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Pyle Cycle PLMCA90, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

PLMCA90

Motorcycle Speaker Kit

Waterproof Rated Custom Install

Amplied Speaker System (1200 Watt MAX)

www.PyleUSA.com www.PyleUSA.com

PLMCA90

Part # with Image

(2) Pair of 300 Watt Stereo Chrome Speaker

Enclosures with Speaker Wires

(2) Pair of Handlebar Speaker Enclosure "P"

Shape Clamp

(2) Pair of Handlebar Music Source Mount “Z”

Shape Clamp

(1) Micro Stereo 4CH Amplier (350 Watts x 2

Max Output Power

(1) Universal Chrome Handlebar MP3/Audio

Mount with (2) Black Industrial Velcro

(1) Amplier 12 Volt (-) Ground Blue Spade

Terminal

(1) Amplier 12 Volt (+) Ground Male

Terminal Connector

(1) Universal 12 Volt Wire Harness Connection

#10

#11

#12

#13

#14

#15

(1) 12 Volt Direct Plug, for Compatible

Motorcycles

(1) USB Charger/ Power Source

(1) Adjustable Rotary Volume Control

3.5 mm Interface

(1) Black Industrial Velcro Adhesive Strips

(6) Black Wire Tie Lockable Straps

(8) Screws for Speaker

(2) Screw, Washer and Nut for Amplier

What is Included?

Upon un-packing your new Pyle Cycle Series audio system,

please check to ensure you have all the included parts.

CUSTOM INSTALLATION

Mounting hardware and accessories makes it easy for you to install the speakers in a comfortable and safe location on your handlebars.

INSTALLATION NOTES:

a. Prior to installation nd a safe and suitable location

for mounting the speakers and amplier.

b. Be sure to run all wiring securely. Choose a location

away from any heat source and moving components.

c. Ensure proper cable wiring especially with regards to

connections via your vehicle's power source/supply.

d. Do not attempt to operate or install the amplier

& speaker unit when operating your vehicle.

e. Firm installation connections must be applied,

followed by proper electrical connection insulation.

Installation Instructions:

Step #1: Install "P" shaped clamp (Item #2)/"Z" shaped clamp (Item #3)

threaded on to the bottom of each speaker enclosure (Item #1).

Use the provided bolts (item #14).

Step #2: Bolt each speaker with its mount to the handlebar of the vehicle.

Hardware included will allow for mounting on to 1" diameter and

smaller handlebars. Project each speaker at desired listening level,

for best performance.

Step #3: Secure speaker wires either through handlebars for a custom look,

or use (Item #13) wire ties to secure to the handlebars.

Step #4: Bolt the rotary volume control (Item #11) to the handlebars using

the vehicle provided hardware. Then run 3.5 mm connection down

to desired amplier location. Use (Item #13) wire ties to secure to

the handlebars. Have 3.5 mm male connection close to mount. The

Connector that comes pre-installed on the amplier wire harness

(Item #8) was designed to allow for direct plug-in for most American

Motorcycles (Item #9). If mounting on a metric or universal vehicle,

this harness will not be used, and replaced with the terminals /

connectors provided in the enclosed parts bag according to the

installation instructions (Items #6, #7, & #8). Follow wire instructions

as shown in Diagram A Be sure to match the proper polarity for all

connections. The polarity for the speaker terminals solid color wire

(+), wire with stripe (-). Blue wire 12 Volt Positive (+) terminal trigger

wire. Black wire 12 Volt (-) Ground to chassis of vehicle.

Step #5: Bolt the Universal Handlebar MP3/Audio Mount (Item #5) using

provided black industrial velcro adhesive strips (Item #12 ).

Remove bolt from existing switch housing on motorcycle and

secure to bracket.

Step #6: Bolt the USB Charger/ Power Source (Item #10) using vehicle

provided hardware. This wire should be connected 12 Volt power

source.

Step #7: Run wires up to neck area of motorcycle and plug into harness. Use

(Item #13) wire ties to the frame.

Step #8: Bolt amplier on Motorcycle with provided Bolt (item #15). Best if

mounted directly to frame out of reach from direct heat or crash bar.

Step #9: Attach Velcro strips (Item #12) one side to our Universal Bracket

(Item #5) the other to your MP3 player/ audio source.

Step #10: Connect 3.5mm male connection into Audio device, and opposite

side into Micro Amplier

Produkt Specifikationer

Mærke:	Pyle
Kategori:	Højttaler
Model:	Cycle PLMCA90

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle Cycle PLMCA90 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Pyle Manualer

Pyle PCB4BK Manual

4 September 2025

Pyle PLMR24 Manual

4 September 2025

Pyle PDWR50W Manual

30 August 2025

Pyle PDWR42BBT Manual

29 August 2025

Pyle PHSP131T Manual

29 August 2025

Pyle PDWR42WBT Manual

29 August 2025

Pyle PHSKR20 Manual

26 August 2025

Pyle AZPWPS63BL Manual

9 August 2025

Pyle PWRC52 Manual

9 August 2025

Pyle PWMA1225BT Manual

9 August 2025

Højttaler Manualer

Nyeste Højttaler Manualer

Triangle Magellan Duetto 40th Manual

9 Oktober 2025

Soundfreaq SFQ-01A Manual

9 Oktober 2025

Caliber HPG529BTL Manual

9 Oktober 2025

TOA SR-CL8 Manual

9 Oktober 2025

Soundcore Boom 2 Manual

9 Oktober 2025

Caliber HFG411BT Manual

9 Oktober 2025

Infinity Kappa 52.11i Manual

8 Oktober 2025

Soundfreaq Pocket Kick Manual

8 Oktober 2025

Soundfreaq Sound Platform 2 Manual

8 Oktober 2025

Soundfreaq Sound Spot Manual

8 Oktober 2025