Pyle PCB3BK Manual

Pyle Højttaler PCB3BK

Læs gratis den danske manual til Pyle PCB3BK (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Pyle PCB3BK, eller vil du spørge andre brugere om produktet?

Side 1/2
www.PyleUSA.com
Features:
Installation
MOUNTING THE BRACKET
Pull out half of the key at the back of the speaker, then insert the support through the hole
on the key, and the support is xed to the wall.
Visit Our Website
SCAN ME
PyleUSA.com
USER GUIDE
3"100 Watt Mini Cube
Speaker Pair
Full Range Mini Speaker System
Great for Home Theater Applications
Video Shielded
3" Paper Cone Driver
Power Handling: 100 Watts Peak
Frequency Response: 90 Hz - 18 kHz
8 Ohm Impedance
Dimensions: 3.6" (H) x 3.6" (W) x 4.6” (D)
MOUNTING
www.PyleUSA.com
FINAL ADJUSTMENTS
1. After checking that the speaker is in phase and works correctly, angle the speaker for the
best sound.
2. Hand-tighten the bracket knobs only. Power tools may over-tighten the knob and strip
the threads of the insert.
3. Check that the entire installation is safe and secure.
Connecting Your Speakers
California Prop 65 Warning
WARNING:
This product can expose you to chemicals, which is known to
the state of California to cause cancer birth defects and other
reproductive harm. Do not ingest.
For more info go to: www.P65warnings.ca.gov
Questions or Comments?
We are here to help!
Phone: 1.718.535.1800
PyleUSA.com/ContactUs
Connecting the speakers to your amplier
or receiver.
First, turn your amplier o to avoid
damage which may result from accidental
shorting of the speaker leads.
Correct phase polarity is critical for proper
stereo imaging and bass performance.
The red (+) terminal on your amplier or
receiver must be connected to the red (+)
terminal on your speaker; the same applies
to the black (-) terminal.
Connect one loudspeaker at a time to
ensure proper connection of left and right
channels. Make sure all wires are rmly
fastened.
If you notice a high level of bass or central
image focus, double-check your connections
for proper polarity.


Produkt Specifikationer

Mærke: Pyle
Kategori: Højttaler
Model: PCB3BK
Bredde: 91.44 mm
Dybde: 116.8 mm
Højde: 91.44 mm
Produktfarve: Sort
Udgangseffekt (RMS): - W
Equalizer: Ingen
Frekvensområde: 90 - 18000 Hz
Impedens: 8 ohm (Ω)
Forbindelsesteknologi: Ledningsført
Lyd-output kanaler: 2.0 kanaler
Højttaler, placering: Bordplade/bogreol
Strømkilde type: Ikke understøttet
Antal drivere: 2
Driver diameter: 76.2 mm
Peak Music-Udgangseffekt (PMPO): 100 W
Antal produkter inkluderet: 2 stk
Bashøjttaler: Ingen
Forstærker: Ingen
Subwoofer driver diameter (britisk): 3 "
Drivercylinder, materiale: Papir
Magnetisk afskærmet: Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PCB3BK stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler Pyle Manualer

Pyle

Pyle PCB4BK Manual

4 September 2025
Pyle

Pyle PLMR24 Manual

4 September 2025
Pyle

Pyle PDWR50W Manual

30 August 2025
Pyle

Pyle PDWR42BBT Manual

29 August 2025
Pyle

Pyle PHSP131T Manual

29 August 2025
Pyle

Pyle PDWR42WBT Manual

29 August 2025
Pyle

Pyle PHSKR20 Manual

26 August 2025
Pyle

Pyle AZPWPS63BL Manual

9 August 2025
Pyle

Pyle PWRC52 Manual

9 August 2025
Pyle

Pyle PWMA1225BT Manual

9 August 2025

Højttaler Manualer

Nyeste Højttaler Manualer