Pyle PHSP8K Manual

Pyle Højttaler PHSP8K

Læs gratis den danske manual til Pyle PHSP8K (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Pyle PHSP8K, eller vil du spørge andre brugere om produktet?

Side 1/2
www.PyleUSA.com
PHSP6K - PHSP8K - PHSP12K
Indoor/Outdoor PA Horn Speaker
How to use
1. Careful attention should be required to the polarity when more
than two speakers are in operation at the same place, otherwise
the sound of poor quality and/or sound pressure of low level will
be reproduced. Connection should be made in the same way as
in the case of battery, same polarity with parallel con-nection and
dierent polarity with series connection.
2. When long wiring is called for, the low impedance connection
invites large power loss, resulting in inecient operation of
speakers, in case wiring becomes longer than 50 meters, equip
matching transformer and use with proper high impedance.
3. For low impedance connection, the total impedance of speakers should be equal to the output
impedance of amplier.
4. Do not operate the unit for an extended period of time with the sound distorting. This is an
indication of a malfunction, which in turn can cause heat to generate and result in re.
Speaker
Bracket
www.PyleUSA.com
PHSP6K - 6.3”
PHSK8K - 8.1”
PSSK12K - 10”
PHSP6K - 6.1”
PHSK8K - 7.9”
PSSK12K - 9”
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Technical Data PHSP6K PHSP8K PHSP12K
Load rating 25W 50W 55W
Nominal impedance 8 ohms 8 ohms 8 ohms
Freaquency range 400Hz-6KHz 400Hz-6KHz 400Hz-5KHz
SPL(@1W/m) 100 dB 103 dB 105 dB
Dimension ØxD (mm) Ø160x155mm Ø206x200mm Ø260x228mm
Material ALU ALU ALU


Produkt Specifikationer

Mærke: Pyle
Kategori: Højttaler
Model: PHSP8K
Bredde: 200 mm
Dybde: - mm
Højde: - mm
Vægt: 1220 g
Produktfarve: Grå
Udgangseffekt (RMS): 50 W
Husmateriale: Aluminium
Frekvensområde: 400 - 6000 Hz
Lydtryksniveau (maks.): 103 dB
Impedens: 8 ohm (Ω)
Højttaler, type: 1-vejs
Højttaler, placering: Ceiling-mountable,Wall-mountable
Monteringsbeslag inkluderet: Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PHSP8K stil et spørgsmål nedenfor, og andre brugere vil svare dig