Pyle PLMRA830BT Manual

Pyle Modtager PLMRA830BT

Læs gratis den danske manual til Pyle PLMRA830BT (27 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Pyle PLMRA830BT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/27

Elite Series Waterproof Amplifiers

Warnings

If the unit is likely to undergo excess vibration through use, your must properly install the unit securely. Damage

caused by insufficient support is not covered by the warranty. To prevent damage to the unit's panels, always

use protective plastic cups or washers before tightening mounting bolts.

PLEASE NOTE: Users must ensure that any type of smoke and related substances are not allowed to

enter the amplifier. Smokey air is corrosive and prolonged exposure will cause irreparable damage to

your amplifier. Take precaution before reconnecting to a power supply. Be aware that when any

equipment is taken from a cold to humid location, condensation may occur inside. Always allow time

for the equipment to attain the same temperature as its environment before reconnecting to a

power supply.

• Read these instructions and keep them for future reference.

• Carefully follow instructions and follow directions carefully.

• Keep the amplifier dry, as some liquids may contain minerals that corrode electronics circuitry.

• Clean amplifier housing only with a slightly damp cloth. No chemicals or solutions.

• Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.

• Do not install near any heat source such as radiators, stoves, or other electrical devices that produce heat.

• Prevent any cables, wired or power cord from being walked on, bent, stretched or pinched, particularly at

the plug or at the point where connects to the amplifier.

• When uncertain about specifications, please first consult the Pyle Audio website and see the FAQs.

• Ensure this unit is placed on a stable and flat surface and can accommodate the weight of this unit.

• Unplug this unit during lightning storms or when it is unused for an extended period of time.

• Do not leave this device unattended when powered on.

• Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged

or malfunctions in any manner. This would include damage to he power supply cord or plug. t

Service may be obtained from an authorized Pyle Audio service center. Contact Pyle Audio and

make sure you have a receipt as proof of purchase along with the defective unit. You will be then

instructed to send or deliver the malfunctioning unit to an authorized center. They will handle the

necessary paperwork and repair. Remember to transport your unit in the original factory packaging.

Produkt Specifikationer

Mærke:	Pyle
Kategori:	Modtager
Model:	PLMRA830BT
Tænd-/slukkontakt:	Ja
Bredde:	276.86 mm
Dybde:	548 mm
Højde:	68.5 mm
Produktfarve:	Blue,White
Volumenkontrol:	Dreje
Frekvensområde:	15 - 30000 Hz
Forbindelsesteknologi:	Kabel & trådløs
Lyd-output kanaler:	- kanaler
LED-indikatorer:	Ja
Formål:	Båd
DC indgangsspænding:	12 V
klirfaktor (THD):	0.04 %
Antal kanaler:	8 kanaler
Signal/støjforhold:	95 dB
Spidseffekt pr. kanal:	3000 W
Højttalere tilslutningstype:	RCA
Indgangsimpedans:	10000 ohm (Ω)
RMS udgangseffekt pr. kanal (4 Ohm):	1100 W
RMS udgangseffekt pr. kanal (2 ohm):	1850 W
Indgangsfølsomhed:	250 mV
Bas-boost:	0 - 18 dB
Dynamisk effekt pr. kanal (4 Ohm):	1600 W
Dynamisk effekt pr. kanal (2 Ohm):	2900 W