Pyle PLMRC400X4 Manual

Pyle Modtager PLMRC400X4

Læs gratis den danske manual til Pyle PLMRC400X4 (12 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Pyle PLMRC400X4, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
4-Channel Weather-Resistant Audio Amplifier System
PLMRC400X4
Class D Compact Designed Suit for Car, ATV,
UTV, 4X4, Jeep, Motorcycle and Marine,
and any other Weather Resistant Application
www.PyleUSA.com
2
INTRODUCTION
This power amplier has been designed to provide high quality performance
with a minimum of maintenance. However, it's performance will only be as good
as the care and quality of components with which is installed.
We therefore advise that you read these instructions very carefully to familiarize
yourself with the product and it's features.
Before installing the power amplier please read this instruction manual
carefully. The instructions for mounting and connecting the set have to be
followed precisely. If necessary, a service center should be consulted.
All connections for DC power, signal input and speaker outputs can be carried
out easily and safely byway of RCA and screwed terminals.
INSTALLATION INSTRUCTIONS
Please choose a mounting place without any direct weather inuences.
Note that the amplier generates heat so that a well ventilated place is necessary.
According to your car's construction the set can be made very carefully in order
to ensure the amplier's full performance and reliability.
Keep the wire connections as short as possible with sucient dimensions in
order to minimize power losses and provide a higher audio output of the system.
For safety reasons route all power and speaker wiring by using the exiting wire
channels. To minimize damage to the cables, take care that they do not pass
sharp edged metal. Lay all cables as far away as possible from the ignition cables,
modules in the boot and under the key dashboard, as this create interference.
Add a fuse into the (+) power cable in a distance of not more than 30 cm from
the positive battery pole.
Keep the length of the power wires as short as possible. It is better to use power
cables which are short and then longer speaker cables.
In order to reduce interference, also pay attention to the instructions.

Produkt Specifikationer

Mærke: Pyle
Kategori: Modtager
Model: PLMRC400X4

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PLMRC400X4 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Modtager Pyle Manualer

Pyle

Pyle PATVR10 Manual

3 Juni 2025
Pyle

Pyle PFMRA340BB.5 Manual

13 Januar 2025
Pyle

Pyle PLMRMBT5B Manual

6 December 2024
Pyle

Pyle P3001AT Manual

6 December 2024
Pyle

Pyle PTAU45.5 Manual

22 September 2024
Pyle

Pyle PWMA3003BT Manual

20 September 2024
Pyle

Pyle Pro PTAU23 Manual

6 September 2024
Pyle

Pyle INV500DBA Manual

5 September 2024
Pyle

Pyle PDA4BU Manual

3 September 2024
Pyle

Pyle PD1000BA Manual

1 September 2024

Modtager Manualer

Nyeste Modtager Manualer

Planet Audio

Planet Audio PL3000.1D Manual

15 Juni 2025
Planet Audio

Planet Audio PSX18 Manual

15 Juni 2025
Planet Audio

Planet Audio MB600.2D Manual

15 Juni 2025
Planet Audio

Planet Audio AC1600.4 Manual

15 Juni 2025
Planet Audio

Planet Audio PL2400.4 Manual

15 Juni 2025
Rane

Rane Zone Power Eight Manual

14 Juni 2025
Blaupunkt

Blaupunkt Melbourne 130 Manual

14 Juni 2025
NVX

NVX NDA12001 Manual

14 Juni 2025
Denon

Denon AVC-1930 Manual

14 Juni 2025
Blaupunkt

Blaupunkt Kansas City 910 Manual

13 Juni 2025