Pyle PLSMRW104WT Manual

Pyle Højttaler PLSMRW104WT

Læs gratis den danske manual til Pyle PLSMRW104WT (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Pyle PLSMRW104WT, eller vil du spørge andre brugere om produktet?

Side 1/4
Features:
10'' Slim Waterproof Subwoofer
Completely Waterproof
For Marine or Car Use
PP Cone with Rubber Edge
High-Powered Car Subwoofer
Lab Tested Pro Audio Woofer Performance
Massive Butyl Rubber Surround
High Strength Engineering Plastic Basket
Quick Connect Speaker Terminal
Compatible with Sealed Enclosure Speaker Box Audio Setup
Impressive Bass Response, Low-Resonance Frequency Output
Designed for Custom Audio Car, Truck, Mobile Vehicle Applications
Installation Guide
Screw down each of the four Phillips
head screws. The locking tabs will
swivel into place and secure the unit
to the rear surface of the drywall.
Put in the strips of adhesive to
secure the grille.
Replace the metal grille.
10'' Slim Waterproof Subwoofer
400 Watts at 4-Ohm Car Audio Powered Subwoofer, PP Cone with Rubber Edge
PLSMRW104WT - PLSMRW104BK
www.PyleUSA.com
Cut the drywall.
Note: Always allow at least one-half
inch between a wall stud and the
speaker cutout or the locking tabs
will not be able to swivel into place.
Connect the speaker wires to the
speaker.


Produkt Specifikationer

Mærke: Pyle
Kategori: Højttaler
Model: PLSMRW104WT

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PLSMRW104WT stil et spørgsmål nedenfor, og andre brugere vil svare dig