Pyle PPHP1293 Manual

Pyle Højttaler PPHP1293

Læs gratis den danske manual til Pyle PPHP1293 (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 67 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 34 anmeldelser. Har du et spørgsmål om Pyle PPHP1293, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

1.Microphone input 11/12.Signal output

Allows you to connect a microphone Use this jack to connect cenother

with a 6.3mm connector. amplifier or even another powered

Is used microphone Input and Line speaker cabinet in cascade

input. using a cannon conneltor

2.Banlanced Microphone Input 14.AC power

Connector for a balanced microphone To connect the AC power cord

input and line input.

15.On/Off Power Switch

3.Mic/Line input button Press to power on/off the speak box

Keep this button up, the single will be in,

keep this button down, the MIC will be in 16.MP3 LCD

4.Microphone control 17.Button

Use this control to set the volume level Use it to power on/off Mp3 player

of the microphone(6.3mm or balanced) controller

5.RCA Line-In 18.Usb connector

Allows you to connect an externel audio Use it to plug in a USB device with Mp3

device(CD, radio / DVD,etc) with RCA file

connectors

19.MP3 control

6.Cannon Line-In Use this control to set the Volume level

Allows you to connect an external audio of the Mp3

device (CD, radio / DVD,etc) with

cannon connectors

7.Line-In signal volume control

Use this control to set the volume level

of the Line-In signal

8.Volume control

Set the volume level

9.Treble

Use it to set the treble level

10.Bass

Use it to set the bass level

PPHP153MPPHP123M

FEATURES

PPHP1293:

12'' 800 Watt 2 Way Plastic Molded Speaker

Cabinet

PPHP1298A:

12'' 800 Watt Powered 2 Way Plastic Molded

Speaker Cabinet

PPHP1593:

15’' 1000 Watt 2 Way Plastic Molded Speaker

Cabinet

PPHP1598A:

15” 1000 Watts Powered 2 Way Plastic Molded

Speaker System

-15” Woofer

- 12” Woofer

-1.75” Titanium Compression Driver

- 1.5” Titanium Compression Driver

-Full Featured 3 Channel Mixer

- Dual 1/4” and Dual Speakeon Jacks

-Dual XLR and 1/4” Mic Inputs

- Frequency Response: (-10dB): 47Hz - 18 Khz

-XLR & Stereo RCA Line Input

- 2 Way Ported Enclosure for Extra Bass Response

-XLR and 1/4” Line Outputs

- Power Max: 800 Watts

-Master Volume, Bass & Treble Controls

- Power RMS: 400 Watts

-Frequency Response: 35Hz - 20 KHz

- Sensitivity: 92dB/W/M

-Power Output: 500 Watts RMS, 1000 Watts Peak

- Crossover Frequency: 3.0K Hz

-Crossover Frequency: 3.0K Hz

- 35mm Speaker Stand Mount

-35mm Speaker Stand Mount

- Dimensions: (H)23.6” x (W)18” x (D)13.2”

-110/220 Voltage Selectable

- Weight: 31 Lbs

-Dimensions: W20” (f)12” (b)x D16” x H28.5”

-Weight: 49 Lbs

-Wheels Handles Included

- 12” Woofer

- 1.5” Titanium Compression Driver

- Full Featured 3 Channel Mixer

- Dual XLR and 1/4” Mic Inputs

- XLR & Stereo RCA Line Input

- XLR and 1/4” Line Outputs

- Master Volume, Bass & Treble Controls

- Frequency Response: 47Hz - 18 Khz

- Power Output: 400 Watts RMS, 800 Watts Peak

- Crossover Frequency: 3.0K Hz

- 35mm Speaker Stand Mount

- 110/220 Voltage Selectable

- Dimensions: W19” (f)11” (b)x D14.5” x H24.5”

- Weight: 38 Lbs

- 15” Woofer

- 1.75” Titanium Compression Driver

- Dual 1/4” and Dual Speakeon Jacks

- Frequency Response: (-10dB): 35Hz - 20 Khz

- 2 Way Ported Enclosure for Extra Bass Response

- Power Max: 1000 Watts

- Power RMS: 500 Watts

- Sensitivity: 97dB/W/M

- Impedance: 8 ohm

- Crossover Frequency: 3.0K Hz

- 35mm Speaker Stand Mount

- Dimensions: (H)28” x (W)18.8” x (D)15.2”

- Weight: 42 Lbs

- Wheels Handles Included

USER’S MANUAL

PPHP1293

PPHP1298A

PPHP1593

PPHP1598A

www.pyleaudio.com

Before using your new Speaker System Please review the

following instructions, for the safety and investment.

INSTRUCTIONS

Before connecting the speaker, make sure the system is off and the controls on the minimum level. On the

contrary the system could damage

1.Plug the power cable to the AC outlet and to the system and the speaker

2.Plug the microphone in the “MIC” input

3.Connect (CD, DECK, MP3, DVD, etc) on “LINE IN” input

4.Turn on the systems. A green LED will light up to indicate the speaker is on

5.Set the volume on the low level on the MIC and the LINE IN input

6.Increase the master volume (place on the right side of the LINE OUT *connector)

7.Set TREBLE and BASS controls to equalize the sound

8.A red LED will light up when the system detects overload power. You will must decrease the volume.

CAUTIONS

Do not place the microphone against the speaker, it can cause feedback echo and it will damage the system

EXTRA FUNCTIONS

6.3 And canon connectors marker as LINE OUT can handle an amplifier or even another powered speaker

cabinet, in cascade. On the bottom of the speaker there is a hole to place a stand.

Electrical safety

All products are fitted with a detachable power cord (supplied) which connects to the AC mains and the back panel of the

loudspeaker. The power cord has an IEC female connector on one end and male mains connectors on the other end. This

cord is supplied specially to accommodate the different worldwide safety and electrical code requirements. The power

cord supplied with your product has a 3-pin type plug. Do not cut off or damage the grounding plug. Like any electrical

appliance, your EON powered speakers should not be used in water or when wet.

Product design and specifications are subject

to change without previous notice.

SPECIFICATIONS:

Woofer

Impedance

Sensitivity

Freq.Resp

Diameter

Magnet

Tweeter

Coil Diameter

PPHP1293 PPHP1298A PPHP1593 PPHP1598A

8 ohms 8 ohms 8 ohms 8 ohms

95 dB/m/w 95 dB/m/w 97 dB/m/w 96 dB/m/w

8 ohms 8 ohms 8 ohms 8 ohms

12”

2.5” 2.5” 3”

12” 12” 15”

50 oz 50 oz 60 oz 60 oz

3”

45Hz-5000KHz 45Hz-5000KHz 30Hz-3500KHz

800Hz-20KHz 800Hz-20KHz 800Hz-20KHz 800Hz-20KHz

30Hz-3500KHz

100 dB/m/w 100 dB/m/w 100 dB/m/w 100 dB/m/w

Magnet

Coil Diameter

Built-in Amplifier

13.5 oz

(90*40*15)

13.5 oz

(90*40*15)

YESNO NONO

21 oz

(115*56*15)

21 oz

(115*56*15)

1.35” (34.4mm) 1.35” (34.4mm) 1.75”(44.4mm)1.75”(44.4mm)

NO.PPHP1293

NO.PPHP1593

Produkt Specifikationer

Mærke:	Pyle
Kategori:	Højttaler
Model:	PPHP1293

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PPHP1293 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Pyle Manualer

Pyle PLMRKT8 Manual

30 Juni 2025

Pyle Cycle PLMCA90 Manual

30 Juni 2025

Pyle PSBV620BT Manual

24 Juni 2025

Pyle PDIC60T Manual

24 Juni 2025

Pyle PL63BL Manual

24 Juni 2025

Pyle PDWRBT36BK Manual

23 Juni 2025

Pyle PLMRLWB47WB Manual

23 Juni 2025

Pyle PLMR52 Manual

23 Juni 2025

Pyle PDBT58 Manual

23 Juni 2025

Pyle PLUTV41 Manual

23 Juni 2025

Højttaler Manualer

Nyeste Højttaler Manualer

QSC MD-FP152-96r Manual

7 Juli 2025

Monitor Audio CM-B Manual

7 Juli 2025

Samson MediaOne M30BT Manual

7 Juli 2025

QSC PL-CA12 Manual

7 Juli 2025

FoneStar SVW-1264N Manual

7 Juli 2025

QSC PL-CA15 Manual

7 Juli 2025

Turbosound TQ14M Manual

7 Juli 2025

Turbosound PQ12 Manual

7 Juli 2025

Audac ARCHI10X Manual

7 Juli 2025

Heco Aurora XT Sub 30A Manual

7 Juli 2025