Pyle PPHP1537UB Manual

Pyle Højttaler PPHP1537UB

Læs gratis den danske manual til Pyle PPHP1537UB (7 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Pyle PPHP1537UB, eller vil du spørge andre brugere om produktet?

Side 1/7
USERS MANUAL
www.pyleaudio.com
PPHP1037UB PPHP1237UB PPHP1537UBPPHP837UB
Before using your new Speaker System Please review the
following instructions, for the safety and investment.
INSTRUCTIONS
Before connecting the speaker, make sure the system is off and the controls on the minimum level. On the
contrary the system could damage
1.Plug the power cable to the AC outlet and to the system and the speaker
2.Plug the microphone in the “MIC” input
3.Connect (CD, DECK, MP3, DVD, etc) on “LINE IN” input
4.Turn on the systems. A green LED will light up to indicate the speaker is on
5.Set the volume on the low level on the MIC and the LINE IN input
6.Increase the master volume (place on the right side of the LINE OUT *connector)
7.Set TREBLE and BASS controls to equalize the sound
8.A red LED will light up when the system detects overload power. You will must decrease the volume.
CAUTIONS
Do not place the microphone against the speaker, it can cause feedback echo and it will damage the system
EXTRA FUNCTIONS
6.3 And connectors marker as LINE OUT can handle an amplifier or even another powered speaker XLR
cabinet. On the bottom of the speaker there is a hole to place a stand.


Produkt Specifikationer

Mærke: Pyle
Kategori: Højttaler
Model: PPHP1537UB

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PPHP1537UB stil et spørgsmål nedenfor, og andre brugere vil svare dig