Pyle PSLSW6 Manual

Pyle Højttaler PSLSW6

Læs gratis den danske manual til Pyle PSLSW6 (8 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Pyle PSLSW6, eller vil du spørge andre brugere om produktet?

Side 1/8
PSLSW4 - PSLSW6
Multi-Zone Speaker Selector
www.PyleUSA.com
2
PSLSW4 - PSLSW6 lets you connect up to four (PSLSW4) or six ( PSLSW6) separate
pairs of speakers to your stereo receiver/amplier. The control center is especially
convenient if you have speaker sets in dierent rooms and want to turn them on
and o independently. You can enjoy the convenience and exibility of listening
to multiple speaker pairs simultaneously.
The control center lets you use one to four (PSLSW4) or six (PSLSW6) sets of
speakers at a time, and is designed to operate with a stereo receiver/amplier
that has a maximum of 100 watts per channel, and with speaker systems that
have a minimum impedance of 8 ohms (see on page 6)Impedance Chart
PREPARATIONS
Use the PYLE Speaker Selectors only with ampliers rated at 100 watts per
channel or less.
Your PYLE Speaker Selector is designed to accept any size cable up to 14 gauge
non-terminated speaker wire. If you're using non-terminated speaker wire, do
not use any speaker wire that is larger than 14 gauge. The lower the gauge
number, the larger the cable (e. g: 12 gauge is larger in actual physical size
than 14 gauge).
Do not hook the outputs of one selector into the inputs of another speaker
selector together.
Before you connect the AC power source, make sure you set ALL speakers ON/
OFF to OFF.
Left and right "commons" are isolated to work with all types of ampliers.
Auto transformer impedance protection.
PSLSW4 Front and Back Panels


Produkt Specifikationer

Mærke: Pyle
Kategori: Højttaler
Model: PSLSW6

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PSLSW6 stil et spørgsmål nedenfor, og andre brugere vil svare dig