Python 474P Manual

Python Ikke kategoriseret 474P

Læs gratis den danske manual til Python 474P (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 77 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 39 anmeldelser. Har du et spørgsmål om Python 474P, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

P/N 474P

Replacement

Transmitter

Compatible with the

following systems:

Python

PythonPython 440HP

440HP

440HP440HP

Python

PythonPython 660HP

660HP

660HP660HP

Python

PythonPython 1400XP

1400XP

1400XP1400XP

Python

PythonPython 1600XP

1600XP

1600XP1600XP

MADE IN TAIWAN

P/N 474P 7/03

REPLACEMENT TRANSMITTER

Model 474P, 4 Button hf, HF, Stealth Code Remote

The following Learn Routine can be used to program

this replacement transmitter to the system. In order to

enter the Learn Routine, the system’s Valet/Program

switch must be plugged into the BLUE port.

1. Door. Open a door.

2. Key. Turn the key to the ON position.

3. Choose. Within 5 seconds press and release the

Valet/Program button the number of times corre-

sponding to the desired channel listed below.

Once you have selected the channel, press the

Valet/Program button once more and hold it. The

LED will flash the same number of times as the

channel selected and the siren (if connected) will

chirp to confirm the selected channel. Do NOT

release the button.

4. Transmit. While holding the Valet/program

button, press the button from the transmitter you

wish to assign to that channel. The unit will chirp

(if horn or siren connected) to confirm that the

transmitter has been taught to the receiver

5. Release. Once the code is learned you can release

the Valet/Program button and remove the key.

Channel Number Function

with remote start without remote start

1 7 Auto-learn Standard Configuration

2 8 Auto-learn Single-Button Configuration

11 9 Delete All Transmitters

Standard Configuration

A remote that has been programmed to an standard

configuration will use separate buttons for arm and

disarm similar to a factory keyless entry. Using the

expanded configuration, the transmitter buttons are

assigned to the following functions:

Lock Icon Button

The lock icon button arms and locks the system.

Unlock Icon Button

The unlock icon button disarms and unlocks the system.

AUX Icon Buttons

The AUX icon button operates channel 2.

Siren (or Star) Icon Button

The siren (or star) icon button operates Panic only.

Unlock and Lock (or Star) Icon Buttons

When pressed together, the lock and unlock (or star)

icon buttons operate channel 3.

FCC/ID Notice

This device complies with Part 15 of FCC rules.

Operation is subject to the following conditions: (1) This

device may not cause harmful interference, and (2) This

device must accept any interference received, including

interference that may cause undesired operation.

CAUTION! Changes or modifications not expressly

approved by the party responsible for compli-

ance could void the user's authority to oper-

ate this device.

93207 47416 3

Produkt Specifikationer

Mærke:	Python
Kategori:	Ikke kategoriseret
Model:	474P

Har du brug for hjælp?

Hvis du har brug for hjælp til Python 474P stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Python Manualer

23 August 2024

23 August 2024

23 August 2024

23 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Tripp Lite Protect It! TLP606 Manual

30 Juli 2025

AMX NMX-WP-N2510 Manual

30 Juli 2025

Yealink SIP-T23G Manual

30 Juli 2025

Rothenberger ROBEND 4000 Manual

30 Juli 2025

Tripp Lite SUPDMB710 Manual

30 Juli 2025

Tripp Lite IBAR6ULTRAUSBB Manual

30 Juli 2025

Advantech PCM-34R1TP Manual

30 Juli 2025

Tripp Lite SRIN4141410 Manual

30 Juli 2025

Tripp Lite TLM609GF Manual

30 Juli 2025

Tripp Lite Protect It! TLP368CUBEUAM Manual

30 Juli 2025