QSC AP-212sw Manual

QSC Subwoofer AP-212sw

Læs gratis den danske manual til QSC AP-212sw (4 sider) i kategorien Subwoofer. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om QSC AP-212sw, eller vil du spørge andre brugere om produktet?

Side 1/4
Input Configuration Trapezoid Models
AcousticPerformance
Series
Quick Start Guide
AcousticPerformance trapezoid models have the ability to switch between Passive and Bi-amp modes. Look at the Setting ports, below the input
connectors, to determine the current mode.
Yellow in the Setting port indicates the current mode.
Refer toFigure 1 and Figure 2
Note: The default mode is PASSIVE
– Figure 1 –
– Figure 2 –
– Figure 3 –
– Figure 4 –
Changing from Passive to Bi-amp mode
To change from Passive to Bi-amp or Bi-amp to Passive mode: Refer to Figure 3 and Figure 4.
1. Remove the six screws holding the input cup in place.
2. Remove the input cup, being careful not to place excess stress on the connecting wiring harness.
3. Remove the wiring harness plug from the receptacle at the bottom of the cup.
4. Insert the wiring harness plug into the desired mode receptacle at the bottom of the cup.
5. Turn the input cup over and verify that yellow is visible in the proper SETTING port. If not, move the plug to desired receptacle.
6. Carefully place the input cup back into position on the enclosure, being careful not to bind or pinch any of the wiring.
7. Secure the input cup with the six screws removed in step 1.
TD-000506-00-A
Passive mode Bi-Amp mode
Passive Mode
HPF
N/C
1+
1
-
2
-
2+
HF
LPF
LF
NL4 /
Barrier Strip
NL4 /
Barrier Strip
Bi-Amp Mode
1+
1 -
2 -
2+
HF
L
F
Passive
Bi-Amp


Produkt Specifikationer

Mærke: QSC
Kategori: Subwoofer
Model: AP-212sw
Bredde: 381 mm
Dybde: 610 mm
Højde: 660 mm
Vægt: 30400 g
Produktfarve: Sort
Bluetooth: Ingen
Udgangseffekt (RMS): 600 W
Pakketype: Kasse
Anbefalet brug: Universel
Frekvensområde: 35 - 250 Hz
Impedens: 4 ohm (Ω)
Forbindelsesteknologi: Ledningsført
Lyd-output kanaler: - kanaler
Højttaler, placering: Gulv
Driver diameter: 305 mm
Sensitivitet: 93 dB
Signal/støjforhold: 128 dB
Bashøjttaler: Ja
Antal bashøjttalerdrev: 64

Har du brug for hjælp?

Hvis du har brug for hjælp til QSC AP-212sw stil et spørgsmål nedenfor, og andre brugere vil svare dig




Subwoofer QSC Manualer

QSC

QSC KSUB Manual

11 September 2025
QSC

QSC E118sw Manual

11 September 2025
QSC

QSC AD-C81Tw Manual

10 September 2025
QSC

QSC KS112 Manual

6 August 2024
QSC

QSC LS118 Manual

5 August 2024
QSC

QSC SB-118F Manual

2 August 2024
QSC

QSC KS118 Manual

1 August 2024
QSC

QSC SB-2180 Manual

29 Juli 2024
QSC

QSC SB-218F Manual

25 Juli 2024
QSC

QSC WL118-sw Manual

25 Juli 2024

Subwoofer Manualer

Nyeste Subwoofer Manualer

Martin

Martin ViroSub Manual

11 November 2025
Martin

Martin TXS 18 Manual

10 November 2025
Monoprice

Monoprice SSW-8 Manual

7 November 2025
Eton

Eton RES 10 AR Manual

4 November 2025
Monoprice

Monoprice MSUB-A082 Manual

2 November 2025
NEAR

NEAR IGS12M Manual

2 November 2025
DS18

DS18 BRO-BASS Manual

1 November 2025