QSC KSUB Manual

QSC Subwoofer KSUB

Læs gratis den danske manual til QSC KSUB (105 sider) i kategorien Subwoofer. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2 anmeldelser. Har du et spørgsmål om QSC KSUB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/105

K Series

User Manual

K8 – 105° 1000 W active 8" (200 mm) 2-way loudspeaker system

K10 – 90° 1000 W active 10" (250 mm) 2-way loudspeaker system

K12 – 75° 1000 W active 12" (300 mm) 2-way loudspeaker system

KSub – Dual 12" (300 mm) 1000 W active 4th-order bandpass subwoofer system

*TD-000280-00*

TD-000280-00-D

ENG ENG

IMPORTANT SAFETY PRECAUTIONS AND EXPLANATION OF SYMBOLS

WARNING!

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE AMPLIFIER

COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

The lightning ﬂash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsu-

lated “dangerous” voltage within the product’s enclosure that may be of sufﬁcient magnitude to constitute a risk of shock to humans.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and

maintenance (servicing) instructions in this manual.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. WARNING: To prevent ﬁre or electric shock, do not expose this equipment to rain or moisture. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Allow a minimum of 6" (152 mm) clearance behind cabinet for convection cooling. Keep anything that might restrict airﬂow from the rear of the

enclosure (i.e. draperies, fabric, etc.). Do not block any ventilation opening. This product contains an internal power ampliﬁer that produces heat.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the grounding-type plug on the three-pronged “Edison” style power cable. The grounding plug has two blades

and a grounding prong. The third prong is provided for your safety. If the provided plug does not ﬁt your outlet, consult an electrician for the

replacement of the obsolete outlet. Do not cut off the grounding plug or use an adapter that breaks the grounding circuit. This apparatus must be

properly grounded for your safety.

10. Protect the power cord from being walked on or pinched, particularly plugs, convenience receptacles, and the point where they exit from

the apparatus.

11. The appliance coupler is the AC mains disconnect and should remain readily operable after installation.

12. Use only attachments/accessories speciﬁed by QSC Audio Products, LLC.

13. Use only with hardware, brackets, and components sold with the apparatus or by QSC Audio Products, LLC.

14. Unplug the apparatus during lightning storms or when unused for long periods of time.

15. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply

cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally or has been dropped.

16. Before placing, installing, rigging or suspending any loudspeaker product, inspect all hardware, suspension, cabinets, transducers, brackets and

associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could signiﬁcantly reduce the strength of the

installation and should be immediately corrected. Use only hardware which is rated for the loading conditions of the installation and any possible

short-term unexpected overloading. Never exceed the rating of the hardware or equipment.

17. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.

18. The appliance shall not be exposed to dripping or splashing and no objects ﬁlled with liquids, such as vases, shall be placed on the apparatus.

Produkt Specifikationer

Mærke:	QSC
Kategori:	Subwoofer
Model:	KSUB
Vekselstrømsindgangsspænding:	100 - 120 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Produktfarve:	Sort
LED-indikatorer:	Power, Signal strength, Stand-by
Strømkilde type:	Vekselstrøm
Subwoofer RMS-effekt:	1000 W
Subwoofer driver diameter (britisk):	12 "
Subwoofer driver diameter:	304.8 mm
Subwoofer type:	Aktiv subwoofer
Subwoofer frekvensomrpde:	44 - 148 Hz
Subwoofer spidseffekt:	2000 W
Subwoofer, følsomhed:	130 dB
Subwoofer dybde:	714 mm
Subwoofer bredde:	356 mm
Subwoofer vægt:	33600 g
Subwoofer højde:	665 mm
Antal subwoofere:	1
Subwoofer crossover-frekvenser:	48 - 134 Hz