QSC GX3 Manual

QSC Modtager GX3

Læs gratis den danske manual til QSC GX3 (60 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om QSC GX3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/60

User Manual

GX3 300 watts per channel at 8 ohms

GX5 500 watts per channel at 8 ohms

GX7 725 watts per channel at 8 ohms

GX POWER AMPLIFIER SERIES

*TD-000271-00*

TD-000271-00 REV. D

IMPORTANT SAFETY PRECAUTIONS AND EXPLANATION OF SYMBOLS

1- Read these instructions.

2- Keep these instructions.

3- Heed all warnings.

4- Follow all instructions.

5- WARNING: To prevent re or electric shock, do not expose this equipment to rain or moisture. Do not use this apparatus near water.

6- Clean only with a dry cloth.

7- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce

heat.

9- The appliance coupler is the AC mains disconnect and should remain readily operable after installation.

10- Do not defeat the safety purpose of the grounding-type plug. A grounding plug has two blades and a grounding prong. The wide blade

or third prong are provided for your safety. If the provided plug does not t your outlet, consult an electrician for the replacement of

the obsolete outlet. This apparatus should be connected to a receptacle with a protective earthing (or ground) connection.

11- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit

from the apparatus.

12- Use only attachments/accessories specied by QSC Audio Products, LLC

13- Use only with hardware, brackets, stands, and components sold with the apparatus or by QSC Audio Products, LLC

14- Unplug the apparatus during lightning storms or when unused for long periods of time.

15- Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as

power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been dropped.

!The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance

(servicing) instructions in this manual.

The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated

“dangerous” voltage within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock

to humans.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED PERSONNEL.

WARNING: To prevent re or electric shock, do not expose this equipment to rain or moisture.

QSC® is a registered trademark of QSC Audio Products, LLC

“QSC” and the QSC logo are registered with the U.S. Patent and Trademark Ofce

All trademarks are the property of Speakon® and PowerCon® are registered trademarks of Neutrik LLC their respective owners.

FCC INTERFERENCE STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and if not installed and used in accordance to the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by switching the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.