Qtx RP12 Manual

Qtx Lys RP12

Læs gratis den danske manual til Qtx RP12 (4 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Qtx RP12, eller vil du spørge andre brugere om produktet?

Side 1/4
www.avsl.com 154.113UK User Manual
RP12
12-Channel DMX Relay Pack
Item ref: 154.113UK
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
The 12CH DMX RELAY PACK can be controlled by DMX 512 console. Each output socket is controlled individually by one
relay. It can be widely applied to entertainment hall, stage, social club and indoor building decoration.
Front view:
Rear view:
- LED digital display for DMX addressing and work mode setting
- universal DMX512 (1990) multiplexed digital control
- DMX and Stand Alone operation modes
There are two modes of operation:
DMX: Either: 1, 2, 3, 6 or 12 channel.
Manual control mode.
Each mode can be selected by first pressing the MODE button followed by the UP / DOWN buttons and SET to confirm.
Each of the modes is displayed below:
www.avsl.com 154.113UK User Manual
Control Panel Menu
MODE manual
SET UP
manual
UP/DOWN
manual
instruction
DMX MODE
Address
~
Sets the DMX starting address
DMX
Channels
set
The unit occupies 1 channels
The unit occupies 2 channels
The unit occupies 3 channels
The unit occupies 6 channels
The unit occupies 12 channels
MANUAL
CONTROL
MODE
Manual
Channels
set
12 output sockets occupy 1 channel
12 output sockets occupy 2 channels
12 output sockets occupy 3 channels
12 output sockets occupy 6 channels
12 output sockets occupy 12 channels
Manual
Channels
Open/
close
/
:set channel 1 open :set channel 1
close
/
:set channel 2 open :set channel 2
close
/
:set channel 3 open :set channel 3
close
/
:set channel 4 open :set channel 4
close
/
:set channel 5 open :set channel 5
close
/
:set channel 6 open :set channel 6
close
/
:set channel 7 open :set channel 7
close
/
:set channel 8 open :set channel 8
close
/
:set channel 9 open :set channel 9
close
/
:set channel 10 open :set channel 10
close
/
:set channel 11 open :set channel 11
close
/
:set channel 12 open :set channel 12
close
OTHER
MODE
Display
on/off
LED digital tube display always on
LED digital tube display off
Display
normal/
inversed
LED digital tube display normal
LED digital tube display inversed
Initializatio
n
mode
Initialize the unit at the extra factory setting


Produkt Specifikationer

Mærke: Qtx
Kategori: Lys
Model: RP12

Har du brug for hjælp?

Hvis du har brug for hjælp til Qtx RP12 stil et spørgsmål nedenfor, og andre brugere vil svare dig