Rigol RM-DG Manual

Rigol Ikke kategoriseret RM-DG

Læs gratis den danske manual til Rigol RM-DG (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Rigol RM-DG, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Installation Guide RIGOL

RM-DM-3 Rack Mount Kit

This rack mount kit is designed to mount RIGOL DM3068/DM3058/DM3058E series digital

multimeter into a 19-inch cabinet that conforms to the Electronic Industries Association (EIA)

standard.

Kit Part Checklist

No. Name Qty. Description

1 Front Plate 1 --

2 Bottom Plate 1 --

3 Left Plate 1 --

4 Right Plate 1 --

5 Retaining Bracket 2 --

6 M4 Screw 16 M4x8 Phillips Pan Head Screw

7 M6 Screw 4 M6x16 Phillips Pan Head Screw

8 M6 Nut 4 M6 Square Lock Cage Nut

Installation Tool

The PH2 Philips screwdriver is recommended.

RIGOL

6 7 8

1 2 6

3 4 5

7 8

Installation Guide RIGOL

Space Requirements

To mount the instrument into the cabinet correctly, please ensure that the following

requirements are met.

 The cabinet must be a standard 19-inch one.

 The available height of the cabinet should be at least 3U (133.5mm).

 The depth of the cabinet should be at least 400mm.

The dimensions of the rack are as shown below.

Unit: mm

Installation Procedures

CAUTION

Only authorized operators are allowed to perform the installation. Improper

installation might cause damage to the instrument or an installation failure.

Installation Guide RIGOL

1. Dissemble the handle

Rotate the handle upright. Then, pull it out from the sides of the instrument to remove

it.

2. Mount the left and right plates

Align the detents of the left and right plates with the openings on both sides of the

bottom plate respectively and insert them into the bottom plate, then fasten them

using eight M4 screws.

3. Place the instrument

Align the rear rubber pads with the specified slots on the bottom plate and ensure the

slots engage the rubber pads.

Installation Guide

RIGOL

4. Fasten the instrument

Put two retaining brackets onto the bottom plate and fasten the instrument with four

M4 screws.

5. Mount the front plate

Attach the front plate to the assembled rack, and fasten the front plate with four M4

screws.

6. Get encased in the cabinet

Mount the assembled instrument and rack into a standard 19-inch cabinet using four

M6 screws and four M6 square nuts.

-End-

Produkt Specifikationer

Mærke:	Rigol
Kategori:	Ikke kategoriseret
Model:	RM-DG

Har du brug for hjælp?

Hvis du har brug for hjælp til Rigol RM-DG stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Rigol Manualer

9 September 2025

9 September 2025

2 September 2025

2 September 2025

28 August 2025

28 August 2025

28 August 2025

28 August 2025

6 Juni 2025

6 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

IFM SU9030 Manual

13 September 2025

IFM O2U554 Manual

13 September 2025

Speco Technologies HTi70TM Manual

13 September 2025

QSC RMXa Manual

13 September 2025

Tineco Floor One S2 Series Manual

13 September 2025

Tineco Floor One S3 Breeze Manual

13 September 2025

Tineco Floor One S5 Steam Manual

13 September 2025

Osram VX500-CB Manual

13 September 2025

Zelmer ZTS7990 Manual

13 September 2025

Osram VX250-SP Manual

13 September 2025