Roberts Ortus DAB Charge Manual

Roberts Radio Ortus DAB Charge

Læs gratis den danske manual til Roberts Ortus DAB Charge (3 sider) i kategorien Radio. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Roberts Ortus DAB Charge, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Clock radio, quick start guide and safety/warranty leaet.

Features

Controls

continued overleaf...

STEP 1 - Plug in & play DAB radioWhat is in the Box?

• Bluetooth audio streaming from smartphone, tablet or laptop

• Wireless charging for use with a wireless charging enabled device

• DAB / DAB+ / FM RDS wavebands

• 20 radio station presets (10 DAB and 10 FM)

• Multi-level display dimmer

• 2 alarms with humane wake

• Sleep and snooze timers

• USB socket for device charging

• Headphone socket for private listening

A - Connect to the mains

B - Switch on your clock radio

C - Select a DAB radio station

Please read the safety leaet provided before

connecting your clock radio to the mains.

1 Place your clock radio on a at surface.

2 Fully extend the located on the rear of wire aerial

the clock radio.

3 Plug the mains adaptor into a wall socket and switch

on the socket.

4 A start up screen will show. The clock will set.

Note: If no signals are found it may be necessary to relocate your clock radio to a position

giving better reception and carry out a scan for new stations.

D - Scan for DAB stations

As time passes new stations may become

available or you may have moved to a different

part of the country.

1 Press the Menu Tune button. Press the

Up Down or buttons to highlight ‘SCAN’.

2 Press the OK button. Your radio will perform

a scan of the Band III DAB channels. As

new stations are found, they will be added to the list stored in the radio.

1 Press and release the button to switch On/Standby

on the clock radio. After each use the clock radio

will remember the mode used and then switch on

in that mode the next time it is used. To switch off

your clock radio press the On/Standby button.

2 If this is the rst time the radio is used a scan of

the Band III DAB channels will be carried out.

1 If needed, press the button to select the DAB

DAB mode.

2 Press the or buttons to step Tune Up Down

through the list of available DAB stations.

3 Press the OK button to select the station.

4 Adjust the Volume.

• Press and release the button to cycle through OK

the various DAB display options.

The display options are station name, scrolling

text, program type, signal strength (the minimum

signal marker ( ) shows the minimum signal

strength needed for good DAB reception),

multiplex name, frequency, bit rate, time and

date.

Search tuning - FM

1 Carefully, fully extend the wire aerial.

2 Press the FM button to select the FM mode.

3 Apply a long press on the or Tune Up Down

buttons. Your radio will scan upwards (low to

high frequency) or downwards (high to low

frequency) and will stop automatically when it

nds a station of sufcient strength.

4 If the signal is strong enough and there is RDS

data present the display will show the station

name for a few seconds. Adjust the .Volume

• Press and release the button to cycle OK

through the various FM display options.

To manual tune, press and release the Tune

Up Down or buttons to tune to a station. The

frequency will change in steps of 50 kHz.

STEP 2 - Play FM radio

1 On/Standby / Sleep button

2 Tune Down button

3 Tune Up button

Snooze / Ok / Info button4

Alarm button5

Menu / Back button6

Volume Up button7

Volume Down button8

Dimmer button9

10 Preset button

11 Light sensor

12 Bluetooth Pair button

13 FM button

14 DAB button

15 Wireless charging pad

16 LED display

17 Loudspeaker

18 USB socket (for service use only)

19 DAB / FM wire aerial

20 Headphone socket

21 USB charging socket

22 AC adaptor cable

DAB

There are 20 memory presets, 10 for DAB and 10 for FM. Presets are remembered by the

clock radio in the event of a power failure.

To store a preset

1 Tune to the required radio station.

2 on the Apply a long press Preset button.

3 Press the or buttons to select the Tune Up Down

desired station number under which you wish to

store the station. Press the OK button. The display

will show for example, ‘P1 SAVED’. Repeat this

procedure for the remaining presets.

To recall a preset

1 Choose DAB or FM mode.

2 Press and release the Preset button.

3 Use the or buttons to select the Tune Up Down

desired preset. Press . Your clock radio will OK

tune to the station stored in the preset memory.

Note: The display will show ‘EMPTY’ if no station

has been stored to that preset.

Preset radio stations

1 Ensure Bluetooth is enabled on your smart device. Ensure your clock radio is

switched on.

2 Press and release the button to Bluetooth Pair

select the Bluetooth mode. The Bluetooth icon

will ash on the display and your clock radio will

show that it is ‘discoverable’.

3 On your smart device select ‘Ortus DAB Charge’.

Once the connection is established the icon will

remain steady. You may now play your music.

4 Adjust the volume on your Bluetooth device or

on your clock radio. Press for information.OK

5 The audio player in your smart device may be

able to respond to the Play/Pause , Next or

Previous track on the clock radio. Press the

Bluetooth Pair button to pause playback. Press

the button again to resume playback. Press the

Tune Up Downor buttons to skip to the next or

previous track. Note: Not all player applications

or devices may respond to all of these buttons.

6 To connect a different device apply a long press

on the Bluetooth Pair button. Your clock radio

will become discoverable by other devices.

STEP 3 - Bluetooth

Menu options

1 To access or exit your clock radio’s menu

system press the Menu button.

2 Press the Tune Up or Down and OK

buttons to select menu options.

3 To exit menu options, press the Menu

button as needed.

18 20

19 21 22

• It is recommended that the DAB band be used wherever possible as better

results in terms of quality and freedom from interference will usually be obtained

than on the FM band.

Tune

DimPreset

Snooze

DAB FM

Vol

2 3 5 6 7

DAB

Snooze

Tune

DAB

Tune

Snooze

Preset

Tune

Snooze

DAB

Tune

Snooze

Tune

Snooze

Note: If the unit is in the Bluetooth stop mode for more than 15

minutes it will automatically switch to the standby mode. To use

the clock radio again, simply press On/Standby.

Step 4 - Setting alarms

DAB / FM menus System settings

Other information

Circuit features

ROBERTS RADIO LIMITED

www.robertsradio.com

Issue 1a

2021-07-08

FM RDS / DAB+ / Bluetooth

wireless charging clock radio

Please read this guide and the safety/warranty leaet before use

Ortus DAB Charge

Specications

Wireless charging

Power requirements

Mains (Adaptor) 100 240V, 50/60Hz

USB output 5V / 1A

Headphone socket 3.5mm

Aerial System - DAB / FM wire aerial

Bluetooth standards A2DP, AVRCP

Bluetooth codec supported SBC

Frequency coverage FM 87.5 - 108MHz, DAB 174.928 - 239.200MHz

Bluetooth 5.0 frequencies 2.402 - 2.480GHz

Product markings

This symbol indicates AC voltage. This symbol indicates DC voltage.

Mains adaptor

Manufacturer of AC Adaptor: Dongguan Turnmax Electronic Co.,Ltd, Model:

TM-K018VP-00503000PE-03, Input voltage: AC100 - 240V, Input AC frequency:

50/60Hz, Output voltage: DC5.0V, Output current: 3.0A, Output power: 15.0W,

Average active efciency:

81.39%, Efciency at low load (10%): 78.76%,

No-load power consumption: < 0.1W

The name plate is located underneath the clock radio.

The company reserves the right to amend the specication without notice.

Designed & Engineered in the UK

Made in China

If you wish to completely reset your clock radio to its initial state

perform a factory reset. Press the Menu button. Choose ‘SYSTEM’,

‘FACTORY’ ‘RESET?’ then . All user entered settings will be erased.

Press the Menu button. Choose ‘SYSTEM’, ‘LANGUAGE’ then choose

your desired language from the list.

Snooze - Press the Menu button. Choose ‘SYSTEM’, ‘SNOOZE’ then

choose your desired snooze time from 5, 9, 15, 20 minutes or to none.

The software version display is only for reference. Press the Menu

button. Choose .‘SYSTEM’ ‘SW version’ and then

Your clock radio has 2 alarms which can be set to wake you by DAB, FM radio or buzzer. Each alarm can be set to sound once, daily on week-

days or at weekends. Alarms will be retained in the event of a power failure. If no buttons are pressed for 8 seconds, your clock radio will exit

the alarm setup. Use the buttons to select alarm options.Tune Up Down OKor and the

1 When in standby mode or switched on, on the apply a long press Alarm button. Alarm 1 will

show on the display. Press the Tune Up button to select Alarm 2 if required. Press the OK button.

2 Choose the desired alarm hour then the minute.

3 Choose the desired alarm day option: ONCE, WEEKDAYS, WEEKENDS or DAILY.

4 Choose the desired alarm source (DAB, FM, BUZZER).

5 Choose the desired alarm volume using the Tune Up Downor buttons. The clock radio uses

the saved volume settings for each radio alarm when it sounds.

6 Press OK to conrm the alarm settings. ‘SAVED’ will show on the display before exiting the alarm

setup.

Radio alarms are indicated by the

symbol and the alarm number. Buzzer alarms are indicated

by the 1 symbol and the alarm number. The alarm will sound at the selected times for up to

60 minutes unless cancelled. The maximum volume used for the alarm will be specied during

alarm setup. When your clock radio is set to wake by the radio alarm, your radio will switch to the

last listened radio station. If it cannot tune to the radio station, the buzzer will be used instead.

Note: If the clock radio is switched on because of a radio alarm you can only control basic functions

such as the volume. When the buzzer alarm activates it will start softly and gradually increase in

level. The alarm icon will ash on the screen and the radio will automatically switch back to standby

mode when the 60 minutes have elapsed.

Press the Menu button to access the following DAB menu options.

Manual tune - Choose ‘MANUAL’ and then the desired DAB

channel. The minimum signal marker ( ) shows the minimum

strength needed.

DRC - Choose ‘DRC’ ‘0’ then choose , ‘1/2’ ‘1’ or . The DRC facility

can make quieter sounds easier to hear when your radio is used

in a noisy environment. Note: Not all DAB broadcasts use the

DRC function.

Prune station - Choose ‘PRUNE’ ‘PRUNE?’ and then to remove

any stations that are no longer available.

Press the Menu button to access the following FM menu options.

Scan setting - Choose ‘SETTING’ ‘DISTANT’ and then either (your

clock radio will scan for both weak and strong signals) or ‘LOCAL’

(your clock radio will scan for stations with good reception).

Cancel alarm

While an alarm is sounding press and release the On/Standby button to cancel the alarm.

When the clock radio is in standby, repeatedly press the Alarm button to enable or disable either alarm.

Snooze

When the radio or buzzer alarm sounds, press and release the Snooze/OK button. This will silence

the alarm for the selected number of minutes. will be displayed. This sequence can be ‘SNOOZE’

repeated during the 60 minute alarm period. To cancel snooze press and release the On/Standby

button.

Set clock format - Your clock can be set to the 12 or 24 hour clock

format. With your clock radio on or in standby, press the Menu button.

Choose ‘SYSTEM’, ‘TIME’ ‘FORMAT’ then . Choose ‘12’ or ‘24’. If you

choose the 12 hour clock a PM indicator will be displayed.

Set clock manually - If no DAB signal is available you will need to set

the time manually. With your clock radio on, press the Menu button.

Choose , or‘SYSTEM’ ‘TIME’ then ‘SET TIME’. Use the Tune Up

Down OK and buttons to set the hour, minute, day, month and year.

‘SAVED’ will show on the display.

Automatic clock update - Your clock radio usually sets the clock

time using the DAB signal. With your clock radio on, press the Menu

button. Choose ‘SYSTEM’ ‘TIME’ ‘UPDATE’ ‘ANY’, , then . Choose

‘DAB’, ‘FM’ or ‘NO UPDATE’.

A 3.5mm is provided for use with headphones. Headphone Socket

Inserting a plug automatically mutes the internal loudspeaker.

Please be aware that the sensitivity of headphones can vary widely.

Your clock radio has a USB socket which can be used for device

charging. Connect your device to the USB charging socket on the

rear of the clock radio.

Dimmer - Press and release the button to Dimmer

choose Low, Med 1, Med 2, High or Auto. When using the

‘AUTO’ dimmer function the clock radio will determine the

brightness of the environment, then adjust the dimmer to

the most comfortable display brightness.

Sleep timer - Your clock radio can be set to turn off after a preset time

(between 10 and 120 minutes) has elapsed. Apply a long press on

On/Standby On/Standby button. Set the desired sleep time. Press

button to cancel the sleep timer or set the sleep timer to ‘Off’.

Tune

Snooze

Tune Tune

Tune

Dim

Tune

1 To enable wireless charging ensure your clock radio is plugged

into the mains.

2 Place your wireless charging enabled device onto the wireless

charging pad. Your device must have wireless charging to use

this function.

3 Your device will start charging, the charging indicator will

show on the screen. If the charging indicator ashes it will

have detected a non wireless charging device.

Indicator : Flashes - poor connection, Off - no connection

Solid - connected.

• Charging time will depend on your device. Standby / On - 5W.

1 1

DAB DAB

DAB

Snooze

Produkt Specifikationer

Mærke:	Roberts
Kategori:	Radio
Model:	Ortus DAB Charge

Har du brug for hjælp?

Hvis du har brug for hjælp til Roberts Ortus DAB Charge stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Radio Roberts Manualer

Roberts REVIVAL REST Manual

17 August 2025

Roberts Sound 49 Manual

25 Juli 2025

Roberts Stylus Luxe Manual

23 Februar 2025

Roberts Classic DAB Manual

30 December 2025

Roberts Blutune 300L Manual

24 November 2024

Roberts Rambler Max Manual

24 Oktober 2024

Roberts Duet 2 Manual

4 Oktober 2024

Roberts Revival Icon Manual

3 September 2024

Roberts Revival Petite 2 Manual

30 August 2024

Roberts Ecologic 2 Manual

26 August 2024

Radio Manualer

Nyeste Radio Manualer

OXX Digital Tube Internet Radio Manual

13 September 2025

Sangean SG-100 Manual

12 September 2025

Hama 00054254 Manual

12 September 2025

Flex RD 10.8/18.0/230 Manual

12 September 2025

11 September 2025

10 September 2025

9 September 2025

9 September 2025

9 September 2025

9 September 2025