STEP 6 - Menu options Other information
Circuit features
ROBERTS RADIO LIMITED
www.robertsradio.com
© 2024 Roberts Radio Limited
Issue 1
2024-02-08
DAB / DAB+ / FM radio with Bluetooth
Please read this guide and the safety/warranty leaet before use
Revival Petite 2
Specications
Battery safety
Power requirements
DC in USB-C jack 5V 1A
Charging current 500mA
Battery Rechargeable Lithium-ion 3.63V, 2600 mAh, 9.438Wh.
Battery play time Approx 20 hours from a full charge. This gure is only
approximate and is very dependent on play back volume,
battery age, and temperature.
Battery charge time Approximately 6 hours.
Headphone socket - 3.5mm dia.
Aerial System - DAB / FM external aerial
Bluetooth standards A2DP, AVRCP
Bluetooth codecs supported SBC and AAC
Frequency coverage FM 87.5 - 108MHz, DAB 174.928 - 239.200MHz
Bluetooth 5.0 frequencies 2.402 - 2.480GHz
Bluetooth BLE EIRP POWER (MAX.) 3.71dBm
Bluetooth EDR EIRP POWER (MAX.) 3.68dBm
Product markings
This symbol indicates DC voltage.
DAB menu
FM menu System settings System settings
When in DAB mode, apply a long press
on the control to access Tuning / Menu
the following DAB menu options. Rotate
the control and press to select an option.
When in FM mode, apply a long press
on the control to access Tuning / Menu
the following FM menu options. Rotate the
control and press to select an option.
Apply a long press on the controlTuning / Menu
to access the current menu options. Rotate the
control to ‘System’ and press to select.
The name plate is located underneath the radio.
The company reserves the right to amend the specication without notice.
Designed & Engineered in the UK
Factory Reset - If you wish to completely reset
your radio to its initial state perform a factory
reset. Choose ‘System’ then ‘Factory Reset’ and
then choose ‘Yes’. All user entered settings will
be erased.
Note: If the unit is in the Bluetooth or Auxiliary input
stop mode position for more than 15 minutes it will
automatically switch off. To use the radio again,
simply press the Power button.
Note: Reduced power, distortion and stuttering sounds or the battery indicator in
low are all signs that the battery needs to be recharged.
1 To access your radio’s menu system,
apply a long press on the Tuning /
Menu control.
2 To select menu options, rotate the
Tuning control to highlight the option.
3 Press the control to select Tuning
the menu option.
4 To exit a menu, apply a long press
on the Tuning control.
Alternatively, select the option ‘Back’
in the menu.
Menu
Alarm
System
Back
System
Time Update
Time Mode
Clock Set
Manual Tune
Station Order
DRC
DAB Advanced
11B 218.640MHz
11C 220.352MHz
11D 222.064MHz
Manual Tune
Recall Preset
Save Preset
Scan
Menu
Scanning...068
DAB 09:00
DAB Advanced
Sleep Timer
Brightness
Menu
Brightness
DAB
6
Brightness 6
System
Time Update
Time Mode
Clock Set
System
Time Update
Time Mode
Clock Set
System
Time Update
Time Mode
Clock Set
Time Mode
08 / 02 / 2024
17 : 45
DAB *
FM
ANY
Time Update
Time Mode
24h *
12h
Back
Clock Set
Language
Factory Reset
System
No *
Yes
Back
Factory Reset
Recall Preset
Save Preset
Scan Setting
Menu
Menu
Save Preset
Scan Setting
FM Audio
Local *
Distant
Back
Scan Setting
FM Audio
Auto *
Mono
Back
Prune
DAB Advanced
Sleep Timer
Menu
Sleep off
15 minutes
30 minutes
Sleep Setup
Scan
Prune
DAB Advanced
Menu Prune
No
Yes
Back
Manual Tune
Station Order
DRC
DAB Advanced
Alphanumeric *
Ensemble
Valid
Station Order
Manual Tune
Station Order
DRC
DAB Advanced
Off *
Low
High
DRC
Scan - Choose ‘Scan’ to scan the band
III DAB channels.
Prune - Choose ‘Prune’ to remove any
stations that are no longer available.
Manual tune - Choose ‘DAB Advanced’
and then choose ‘Manual Tune’ and then
choose the desired DAB channel. The
signal strength will be displayed. The signal
marker ( ) shows the minimum strength
needed for good DAB reception.
Station order - Choose ‘DAB Advanced’,
‘Station Order’ and then choose either
Alphanumeric, Ensemble or Valid (available
stations).
DRC - Choose ‘DAB Advanced’, ‘DRC’ and
then choose ‘Off’, ‘Low’ ‘High’ or . The DRC
facility can make quieter sounds easier to
hear when your radio is used in a noisy
environment. Note: Not all DAB broadcasts
use the DRC function.
Scan setting - Choose ‘Scan Setting’ and
then choose (your radio will scan ‘Distant’
for both weak and strong signals) or ‘Local’
(your radio will scan for stations with good
reception).
FM Audio - Allows selection of ‘Auto’ or
‘Mono’ Auto. ‘ ’ enables stereo to be played
through headphones if a strong enough
signal is present. If a station has a weaker
signal and alternates between stereo and
mono playback, selecting ‘ ’ forces the Mono
signal to play mono.
Sleep Timer - Your radio can be set to turn off after
a preset time (between 15 and 120 minutes) has
elapsed. Choose ‘Sleep Timer’ and then choose
the desired sleep time. The sleep symbol will
appear on the display . If you wish to switch off
the sleep timer, press the power button to cancel
the sleep timer and switch your radio off.
Preset radio stations
There are 20 memory presets, 10 for DAB
and 10 for FM. Presets are remembered in
the event of a power failure.
To store a preset
1 Tune to the required radio station.
2 on the Apply a long press Tuning /
Menu control.
3 Choose ‘Save Preset’.
4 Use the control to scroll to an Tuning
unused preset or a preset you wish to
change.
Recall Preset
Save Preset
Scan
Menu
P1:BBC R1
P2:Empty
P3:Empty
Save Preset
Recall Preset
Save Preset
Scan
Menu
P1:BBC R1
P2:BBC R2
P3:Empty
Recall Preset
To recall a preset
1 Choose DAB or FM mode.
2 on the Apply a long press Tuning /
Menu control.
3 Choose ‘Recall Preset.
4 Use the control to scroll to the Tuning
desired preset.
5 Press the control to select it.Tuning
5 Press the Tuning control to save
the preset. ‘Preset 2 Saved’ will be
displayed. The preset number will be
shown on the playing display.
Brightness - Choose ‘Brightness’ and then select
the desired brightness level.
In standby mode when plugged into DC power, the
brightness can be set using the volume buttons.
Time Update - Your radio will usually set the time
using the DAB signal. From the current menu
choose ‘System’, and then ‘Time Update’ . Choose
to set the time from ‘DAB’, ‘FM’, ‘ANY’ or Manual.
Time Mode - Choose whether to set the time in
either 24 hour or 12 hour mode.
Clock Set - It is possible to set the clock and
date manually. This will override the current time
setting on the unit.
Clock Set
Language
Factory Reset
System
English *
Dansk
Français
Language
Language - Choose , and ‘System’ ‘Language’
then choose a desired language from the list.
Language
Factory Reset
SW Version
System SW Version
Revival Petite 2
15-V10-0A0A01-211D
SW Version - The software display cannot be
altered and is just for your reference. Choose
‘System’ then ‘SW Version’. Press Tuning to exit
the software display.
Please handle with care. The leather-cloth nish may be susceptible to
damage if mistreated. Avoid all contact with any abrasive material, chemical
substances or cleaning solutions. Your radio may be wiped with a clean
lightly damp cloth. Please ensure that the product is unplugged before
attempting this procedure.
• Do not puncture, crush, modify, or cause any unnecessary shock to the battery. The battery
may present a risk of re, explosion or chemical burn if mistreated.
• Do not dispose of the battery in a re or incinerator.
• Do not leave, charge or expose the battery to a heat source such as in a car under direct
sunlight. Do not expose the battery to moisture.
• Do not use or charge the battery if it appears to be abnormally hot, swollen, leaking or
damaged in any way.
• Do not leave a charging battery unattended. Do not use any alternative power source as a
charger.
• Check the room temperature range is between 5-35°C (41-95°F) before charging the
product / battery.
Please also read the safety leaet
provided before charging your radio.