Roberts RT200 Manual

Roberts Radio RT200

Læs gratis den danske manual til Roberts RT200 (3 sider) i kategorien Radio. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Roberts RT200, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

1 Set the control to zero, raise the and unclip the Anti-skating Cueing lever Tone-arm so that it

moves freely.

2 Hold the It is currently Head-shell .

unbalanced and will drift upwards.

3 Rotate the so that Counterweight

it moves further onto the Tone-arm.

4 Check the balance and lower the

Cueing lever to see if the tone-arm

falls, rises or remains level.

5 Adjust the so that it Counterweight

moves in or out until the Tone-arm

is balanced and remains level when

the cueing lever is lowered.

6 Carefully remove the and adjust the Stylus cover

Counterweight again until the tone-arm is balanced.

Rear view

Clear a work area.

Ensure the packaging is the right-way up.

Open the packaging carefully.

Lift out each item, identify it, and carefully place it to one side.

Dust cover

Base unit with tone-arm

Turntable platter

Rubber mat

Head-shell with cartridge

Counterweight for the tone-arm

Hinges x 2

Cables x 3, comprising

USB cable (type-A - type-B)

Stereo phono plugs - Stereo phono plugs

Stereo phono sockets - 3.5mm stereo plug

45 r.p.m. adaptor holder with screws x 2

45 r.p.m. adaptor

Mains power adaptor with EU and UK pin options

Features

1. Counterweight

Used to set the tracking weight.

2. Anti-skating control

Used to set the anti-skating adjustment.

3. Cueing lever

Use to lower and raise the tone-arm.

4. Tone-arm rest and securing clip

Holds the tone-arm in place when not in use.

5. Tone-arm

6. Head-shell

Holds the cartridge and stylus.

7. 33 / 45 r.p.m. speed switch

Selects the speed for the record to be played.

8. Platter and rubber mat

Place the record here for playing.

45 r.p.m. adaptor holder9.

10. Phono sockets (right and left)

 Audiooutputtoanamplier.

Red = Right channel; White = Left channel.

11. Pre-Amp On/Off Switch

 Controlsuseofthebuilt-inphonopreamplier.

If connected to a Line or Aux input set this switch to On.

12. USB port (see website for details on recording)

Connect to a computer for making recordings.

13. Auto Stop On/Off switch

Controls the use of the automatic switch off.

14. DC input socket

15. Power On/Off switch

continued overleaf...

STEP 1 - Assembling your turntableWhat is in the Box?

B - Attach the counterweight to the tone-arm

1 Slide the on to the .Counterweight Tone-arm

2 Rotate the anti-clockwise (when Counterweight

viewed from the front) until it engages and some

slight resistance is felt.

Note: The scale rotates freely. The counterweight

itself must be rotated in order to engage correctly

with the tone-arm. E - Attach the platter and mat

F - Attach the dust cover

G - Attach the adaptor holder

1 . Place the on the Unpack the Platter Platter

Spindle.

2 Slowly rotate the platter by hand to ensure that it

moves freely.

3 Place the on to the . Rubber mat Platter

1 Fit the two onto the .Hinges Dust cover

2 Locate the other end of the in the Hinges

two Sockets at the rear of the turntable

base.

3 Lower the into place over the Cover

platter and tone-arm.

1 Attach the 45 r.p.m. onto the rear of the turntable Adaptor holder

using a cross head screwdriver. Do not overtighten screws.

2 Place the 45 r.p.m. adaptor into the holder for storage.

A - Connect the head-shell to the tone-arm

Unwrap the base unit and take care not to put pressure on the tone-arm or

the cueing lever. Do not assemble the platter on to the base just yet.

1 Lock the Tone-arm with the securing clip.

2 Take the and identify the locating pin.Head-shell Do not

remove the stylus cover at this time.

3 Align the on the with the slot Locating pin head-shell

in the socket at the end of the . Gently push.tone-arm

4 Rotate the (anti-clockwise when viewed Locking ring

from the front) to pull the two parts together. Only

tighten by hand.

D - Set the tracking weight

1 When the Tone-arm is balanced, place it on its

rest using the securing clip. Carefully replace the

Stylus cover.

2 Keeping the counterweight in place, rotate the

Scale counterweight on the front of the to

zero.

3 A tracking weight of 2.0 grams is recommended for the supplied

cartridge.The tracking weight should not exceed 2.5 grams.

4 Rotate the and together so that the Counterweight Scale

counterweight moves further towards the

tone-arm pivot until the scale reads 2.0

grams.

5 Adjust the control so that it Anti-skating

also reads 2.0 grams. This should normally

match the chosen tracking weight.

C - Balance the tone-arm

Balance the tone-arm Cueing lever (to raise or

lower the tone-arm)

Head-shell

Stylus cover

Stylus

Note:Anincorrecttrackingweightcanhaveasignicanteffectonthequalityoftheaudiowhenplaying

records. If the tracking weight is set too low or too high then excessive wear to the stylus or damage

to the surface of the record may be caused.

10 12 13 14 1511

When removing the stylus cover, do not touch the stylus. Damage caused to the stylus by mishandling

is not covered by the guarantee. When balancing the tone-arm it is important that the stylus never

contacts the turntable platter, mat or base.

Platter

Rubber

mat

Spindle

0.5

2.5

Counterweight

Scale

0.5

2.5

Rotate

Scale 0 to

2.5

1.5

Rotate Counter

weight & scale

to grams2

Head-shell

Stylus cover

Stylus

We recommend that all packaging is kept to allow the turntable to be safely transported in the future.

Head-shell

Stylus

cover

Locating pin Tone-arm

Rotate locking ring

Push

Produkt Specifikationer

Mærke:	Roberts
Kategori:	Radio
Model:	RT200

Har du brug for hjælp?

Hvis du har brug for hjælp til Roberts RT200 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Radio Roberts Manualer

Roberts REVIVAL REST Manual

17 August 2025

Roberts Sound 49 Manual

25 Juli 2025

Roberts Stylus Luxe Manual

23 Februar 2025

Roberts Classic DAB Manual

30 December 2025

Roberts Blutune 300L Manual

24 November 2024

Roberts Rambler Max Manual

24 Oktober 2024

Roberts Duet 2 Manual

4 Oktober 2024

Roberts Revival Icon Manual

3 September 2024

Roberts Revival Petite 2 Manual

30 August 2024

Roberts Ecologic 2 Manual

26 August 2024

Radio Manualer

Nyeste Radio Manualer

Pinell Supersound 901 Manual

16 Oktober 2025

Ruark Audio MR1 Manual

12 Oktober 2025

Ruark Audio R3 Manual

12 Oktober 2025

Ruark Audio R2 Mk4 Manual

12 Oktober 2025

Ruark Audio R810 Manual

12 Oktober 2025

Ruark Audio R2 Mk3 Manual

12 Oktober 2025

TechniSat Viola CD-1 Manual

10 Oktober 2025

Blow RA6 Manual

9 Oktober 2025

Caliber HBC 426BT Manual

8 Oktober 2025

Caliber HFG409DBT Manual

8 Oktober 2025