Roland VS-540 Manual

Roland Printer VS-540

Læs gratis den danske manual til Roland VS-540 (176 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Roland VS-540, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/176

USER'S MANUAL

Thank you very much for purchasing this product.

 To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through

this manual completely and store it in a safe location.

 Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.

 The contents of this document and the specications of this product are subject to change without notice.

 The documentation and the product have been prepared and tested as much as possible. If you nd any misprint or

error, please inform us.

 Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur through use of this

product, regardless of any failure to perform on the part of this product.

 Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur with respect to

any article made using this product.

For the USA

FEDERAL COMMUNICATIONS COMMIS-

SION RADIO FREQUENCY INTERFERENCE

STATEMENT

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to Part 15

of the FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference when the equipment is oper-

ated in a commercial environment.

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in ac-

cordance with the instruction manual, may cause harmful

interference to radio communications.

Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Unauthorized changes or modication to this system can

void the users authority to operate this equipment.

For Canada

CLASS A NOTICE

This Class A digital apparatus meets all requirements of

the Canadian Interference-Causing Equipment Regula-

tions.

CLASSE A AVIS

Cet appareil numérique de la classe A respecte toutes

les exigences du Règlement sur le matériel brouilleur du

Canada.

NOTICE

Grounding Instructions

In the event of a malfunction or breakdown, grounding

provides a path of least resistance for electric current to

reduce the risk of electric shock. This tool is equipped

with an electric cord having an equipment-grounding

conductor and a grounding plug. The plug must be

plugged into a matching outlet that is properly installed

and grounded in accordance with all local codes and

ordinances.

Do not modify the plug provided - if it will not t the

outlet, have the proper outlet installed by a qualied

electrician.

Improper connection of the equipment-grounding con-

ductor can result in a risk of electric shock. The conductor

with insulation having an outer surface that is green with

or without yellow stripes is the equipment-grounding

conductor. If repair or replacement of the electric cord

or plug is necessary, do not connect the equipment-

grounding conductor to a live terminal.

Check with a qualied electrician or service personnel

if the grounding instructions are not completely under-

stood, or if in doubt as to whether the tool is properly

grounded.

Use only 3-wire extension cords that have 3-prong

grounding plugs and 3-pole receptacles that accept

the tool's plug.

Repair or replace damaged or worn out cord imme-

diately.

WARNING

This is a Class A product. In a domestic environment

this product may cause radio interference in which

case the user may be required to take adequate

measures.

WARNING

This product contains chemicals known to cause

cancer, birth defects and other reproductive harm,

including lead.

Operating Instructions

KEEP WORK AREA CLEAN. Cluttered areas and benches

invites accidents.

DON’T USE IN DANGEROUS ENVIRONMENT. Don’t use

power tools in damp or wet locations, or expose them

to rain. Keep work area well lighted.

DISCONNECT TOOLS before servicing; when changing

accessories, such as blades, bits, cutters, and like.

REDUCE THE RISK OF UNINTENTIONAL STARTING. Make

sure the switch is in o position before plugging in.

USE RECOMMENDED ACCESSORIES. Consult the owner’s

manual for recommended accessories. The use of im-

proper accessories may cause risk of injury to persons.

NEVER LEAVE TOOL RUNNING UNATTENDED. TURN

POWER OFF. Don’t leave tool until it comes to a com-

plete stop.

For EU Countries

Manufacturer:

ROLAND DG CORPORATION

1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-ken, 431-2103 JAPAN

The authorized representative in the EU:

Roland DG Corporation, German Oce Halskestr. 7, 47877 Willich, Germany

For California

Produkt Specifikationer

Mærke:	Roland
Kategori:	Printer
Model:	VS-540

Har du brug for hjælp?

Hvis du har brug for hjælp til Roland VS-540 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Printer Roland Manualer

Roland VP-300 Manual

26 August 2024

Roland GX-24 Manual

16 August 2024

Roland SP-540V Manual

4 August 2024

Roland VP-540 Manual

3 August 2024

Roland SC-545EX Manual

2 August 2024

27 Juli 2024

25 Juli 2024

18 Juli 2024

15 Februar 2023

Roland Texart XT-640 Manual

26 December 2022

Printer Manualer

Nyeste Printer Manualer

Kyocera TASKalfa MZ4001ci Manual

17 Juni 2025

Badgy 1 Manual

17 Juni 2025

Pantum BM5300ADW Manual

17 Juni 2025

Pantum BM5300ADN Manual

17 Juni 2025

Kyocera TASKalfa MZ6001ci Manual

16 Juni 2025

Godex ZX1300i Pro Manual

16 Juni 2025

Godex DT200L+ Manual

16 Juni 2025

Godex DT230iL+ Manual

16 Juni 2025

Godex GX4300i Pro Manual

16 Juni 2025

Godex RT700i Pro Manual

16 Juni 2025