Rolls HR341 Manual

Rolls Ikke kategoriseret HR341

Læs gratis den danske manual til Rolls HR341 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Rolls HR341, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

HR341 voice band

audio processor

Quick Start Guide

ROLLS CORPORATION

SALT LAKE CITY, UTAH

01/18

75889 00341

6 3

INTRODUCTION

Rolls HR341 voice band audio processor.

This is a completely analog unit, not a clock in it. Use it as a mixer insert

for taking bandwidth control of a single microphone or a group if your

mixer will allow. Since the optical limiter is on the input it is nearly im-

possible to over drive the unit if the limiter is all the way up.

Also with the load resistor input it could be used for sound control and

even speaker simulation of a small tube or solid state instrument ampli-

er. This unit is very useful for single channel bandwidth and dynamics

control as well as some feedback suppression.

The schematic diagram can be found on the Rolls website

www.rolls.com

http://www.rolls.com/product.php?pid=HR341

SPECIFICATIONS

Connectors: IN: 1/4” Line / Speaker T/S and Insert

OUT: 1/4”, RCA and 1/8” Headphone

Power Supply: Rolls PS27 - 15 VDC OR Rolls PS12 - 12 VAC

Size (W x H x D): 6.75” x 6” x 1.5”

Weight: 1.65 lbs.

The 24dB/oct shelving lters can be set to minimize noise and limit the

voice bandwidth.

The notch lter can eliminate an annoying feedback fundamental. This

is useful for noisy environments where you need to increase intelligibil-

ity and decrease background noise

The headphone jack can cut the speaker out, but not the unswitched

out. The compressor is a soft knee optical type and help smooth out

loud signals transparently. This is ideal in the insert of a mixer for com-

plete control of a microphone.

The built in power amp is about 2 watts and will drive most speakers.

The speaker load switch on the rear is for loading tube type amps that

need a speaker load on their output, or on a solid state unit you can

switch it o. T/S means tip sleeve.

Produkt Specifikationer

Mærke:	Rolls
Kategori:	Ikke kategoriseret
Model:	HR341

Har du brug for hjælp?

Hvis du har brug for hjælp til Rolls HR341 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Rolls Manualer

29 September 2025

6 September 2024

6 September 2024

6 September 2024

4 September 2024

3 September 2024

3 September 2024

Rolls MO2020se Testoscillator Manual

3 September 2024

Rolls DB125 Manual

3 September 2024

Rolls RA102 Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Axis T8312 Manual

12 Oktober 2025

MGI Zip X1 Manual

12 Oktober 2025

MGI Navigator Quad Manual

12 Oktober 2025

Rommer FC 461 MF INOX Manual

12 Oktober 2025

Pulsar Apex XD38 Manual

12 Oktober 2025

Bestron APS526T Manual

12 Oktober 2025

Global SHZ 1000 Manual

11 Oktober 2025

Euro Appliances EMIN110B Manual

11 Oktober 2025

Pulsar Accolade XQ38 Manual

11 Oktober 2025

Megger EVCC300 Manual

11 Oktober 2025