Rolls MS20C Manual

Rolls Splitter MS20C

Læs gratis den danske manual til Rolls MS20C (2 sider) i kategorien Splitter. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Rolls MS20C, eller vil du spørge andre brugere om produktet?

Side 1/2
OWNERS MANUAL
• The MS20c 1/8" (3.5mm) Input is a balanced TRS input.
This Input, however, may
be connected to an unbalanced signal source (Tip-Sleeve) such as a mixer output or
line-level instrument output, and the MS20c balanced outputs connected to a snake
or mixer's balanced input. NOTE: The
Ring of the 1/8" jack MUST be connected to
the Sleeve, and the
• The 1/8" jack may also be used as an unbalanced
output
. Connect a balanced signal
to the top XLR Input, the 1/8" jack may be connected via a Tip-Sleeve jack to an
unbalanced input.
• By referring to the diagram on the top of the MS20c, you can identify the signal
and grounding paths for all the jacks.
Here the MS20c is
connected as a mic
combiner.
NOTE: PHANTOM
POWER IS PASSED TO
ONLY ONE
MICROPHONE.
To transformer isolate a balanced signal, connect the cable with
the signal to be isolated to the INPUT, and the mixer or next de-
vice to the OUTPUT.
an example of the
connected as a mic


Produkt Specifikationer

Mærke: Rolls
Kategori: Splitter
Model: MS20C

Har du brug for hjælp?

Hvis du har brug for hjælp til Rolls MS20C stil et spørgsmål nedenfor, og andre brugere vil svare dig




Splitter Rolls Manualer

Rolls

Rolls MS20C Manual

27 August 2024

Splitter Manualer

Nyeste Splitter Manualer