Russell Hobbs 19420-56 Manual


Læs gratis den danske manual til Russell Hobbs 19420-56 (48 sider) i kategorien Stavblender. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Russell Hobbs 19420-56, eller vil du spørge andre brugere om produktet?

Side 1/48
instructions 2
Bedienungsanleitung 4
mode d’emploi 6
instructies 8
istruzioni per l’uso 10
instrucciones 12
instruções 14
brugsanvisning 16
bruksanvisning (Svenska) 18
bruksanvisning (Norsk) 20
yttöohjeet 22
инструкции (Русский) 24
pokyny (Čeština) 26
pokyny (Slovenčina) 28
instrukcja 30
upute 32
navodila 34
οδηγίες 36
utasítások 38
talimatlar 40
instrucţiuni 42
инструкции (Български) 44
47
2
Read the instructions, keep them safe, pass them on if you pass the appliance on.
Remove all packaging before use.
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This appliance must only be used by or under the supervision of a responsible adult. Use and
store the appliance out of reach of children.
2 Don’t put the appliance in liquid, don’t use it in a bathroom, near water, or outdoors.
3 Keep fingers, hair, clothing and kitchen utensils clear of the whisks.
4 Route the cable so it doesn’t overhang, and can’t be tripped over or caught.
5 Don’t leave the appliance unattended while plugged in.
6 Don’t let anything enter the vents.
7 Don’t use accessories or attachments other than those we supply.
8 Don’t use the appliance for any purpose other than those described in these instructions.
9 Don’t operate the appliance if it’s damaged or malfunctions.
10 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or
someone similarly qualified, in order to avoid hazard.
household use only
C FITTING THE WHISKS
1 Switch off (0) and unplug the mixer before fitting or removing the whisks.
2 Turn each whisk to align the pips on the shaft with the slots in the drive head, then push it
into the drive head till it clicks into place.
3 The whisks may be fitted to either drive head.
C REMOVING THE WHISKS
4 Switch off (0) and unplug the mixer, then shake any excess mixture into the mixing bowl.
5 Hold both whisks, to prevent them jumping out, and press . This will eject them from the 5
drive heads.
C USING THE MIXER
6 Move the speed control to 0.
7 Put the plug into the power socket.
8 Move the speed control to the speed you require (1 to 6).
9 Generally, large quantities, thick mixes, and a high ratio of solids to liquids suggest longer
timings and slower speeds.


Produkt Specifikationer

Mærke: Russell Hobbs
Kategori: Stavblender
Model: 19420-56

Har du brug for hjælp?

Hvis du har brug for hjælp til Russell Hobbs 19420-56 stil et spørgsmål nedenfor, og andre brugere vil svare dig