RYOBI HJP004 Manual

RYOBI Boremaskine HJP004

Læs gratis den danske manual til RYOBI HJP004 (24 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om RYOBI HJP004, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/24
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
12 VOLT COMPACT DRILL-DRIVER
12 V PERCEUSE-TOURNEVIS COMPACTE
TALADRO-DESTORNILLADOR COMPACTO DE 12 V
HJP003
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
TABLE OF CONTENTS
General Power Tool
Safety Warnings 2-3 ..............................
Drill-Driver Safety Warnings 3
...............
Symbols 4
..............................................
 Assembly
............................................
4
Operation
.........................................
5-6
Maintenance
.......................................
7
Figures (Illustrations) 8-9 .......................
Parts Ordering
and Service Back page
.........................
TABLE DES MATIÈRES
Avertissements de sécurité générales
relatives aux outils électriques 2-3 ........
Avertissements de sécurité relatifs
perceuse-tournevis 3
............................
Symboles 4
............................................
 Assemblage
........................................
4
Utilisation
........................................
5-6
 Entretien
.............................................
7
Figures (illustrations) 8-9 ........................
Commande de pièces
et dépannage Page arrière ....................
ÍNDICE DE CONTENIDO
Advertencias de seguridad generales
para la herramienta eléctrica 2-3 .........
Advertencias de seguridad taladro-
destornillador 3 .....................................
Símbolos 4 ............................................
 Armado
..............................................
4
Funcionamiento
.............................
5-6
 Mantenimiento
...................................
7
Figuras (illustraciones) 8-9 ...................
Pedidos de piezas
y servicio Pág. posterior
.......................
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
2 − English
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark
areas invite accidents.

Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.

Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
Use battery only with charger listed. For use with
12V nickel-cadmium and 12V lithium-ion battery packs,
see tool/appliance/battery pack/charger correlation
supplement 988000-449.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energising
power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.

Produkt Specifikationer

Mærke: RYOBI
Kategori: Boremaskine
Model: HJP004

Har du brug for hjælp?

Hvis du har brug for hjælp til RYOBI HJP004 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Boremaskine RYOBI Manualer

RYOBI

RYOBI One+ P215 Manual

23 Juni 2025
RYOBI

RYOBI One+ P222 Manual

20 Juni 2025
RYOBI

RYOBI One+ P223 Manual

20 Juni 2025
RYOBI

RYOBI SDS65 Manual

27 Januar 2025
RYOBI

RYOBI ACTIL04 Manual

15 Juli 2024
RYOBI

RYOBI One+ RPD181 Manual

13 December 2023
RYOBI

RYOBI HP412 Manual

29 September 2023
RYOBI

RYOBI RID1801 Manual

10 Juni 2023
RYOBI

RYOBI One+ RPD18C Manual

3 Juni 2023
RYOBI

RYOBI One+ R18PD2 Manual

10 Januar 2023

Boremaskine Manualer

Nyeste Boremaskine Manualer

Milwaukee

Milwaukee M18 2615-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 2904-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 2903-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 2607-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel Super Hawg 2811-20 Manual

13 August 2025
Bosch

Bosch GBH 18 V-26 Manual

13 August 2025
Milwaukee

Milwaukee M18 2801-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 Fuel 3404 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel Super Hawg 2809-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 2807-20 Manual

12 August 2025