RYOBI PCG719 Manual


Læs gratis den danske manual til RYOBI PCG719 (16 sider) i kategorien Batterioplader. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om RYOBI PCG719, eller vil du spørge andre brugere om produktet?

Side 1/16
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
CHARGING DOCKING STATION F R
ADVANCED STICK VACUUM
STATION D’ACCUEIL DE CHARGEMENT
POUR ASPIRATEUR BALAI AVAN
ESTACIÓN DE CARGA A PAR
ASPIRADORA AVANZADA TIPO ESCOBA
PCG719
Safety Rules for Charger 2-3 .................
Symbols 3 ...............................................
Assembly 4 .............................................
Operation 4-5 .........................................
Maintenance 6 ........................................
Illustrations 7 ..........................................
Parts Ordering/Service Back page ........
Règles de sécurité
concernant le chargeur ................... 2-3
Symboles 3 .............................................
Assemblage 4 .........................................
Utilisation 4-5 .........................................
Entretien 6 ..............................................
Illustrations 7 ..........................................
Commande de pièces
et réparation ...................... Page arrière
Reglas de seguridad para el
empleo del cargador ....................... 2-3
Símbolos 3 .............................................
Armado 4 ...............................................
Funcionamiento 4-5 ..............................
Mantenimiento 6 ....................................
Ilustraciones 7 ........................................
Pedidos de piezas
y servicio ........................Pág. posterior
TABLE DES MATIÈRES ÍNDICE DE CONTENIDOTABLE OF CONTENTS
**************** **************** ****************
WARNING: To reduce the
risk of injury, the user must read and
understand the operators manual
before using this product.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
2 — English
SAFETY RULES FOR CHARGER
Do not charge battery in a damp or wet location. Do
not use, store, or charge battery packs or products in
locations where the temperature is less than 5F or more
than 100° F. Do not store outside or in vehicles.
Always wear eye protection with side shields marked
to comply with ANSI Z87.1. Failure to do so could result
in objects being thrown into your eyes resulting in possible
serious injury.
An extension cord should not be used unless
absolutely necessary. Use of improper extension cord
could result in a risk of fire and electric shock. If extension
cord must be used, make sure:
a. That pins on plug of extension cord are the same
number, size and shape as those of plug on charger.
b. That extension cord is properly wired and in good
electrical condition; and
c. That wire size is large enough for AC ampere rating of
charger as specified below:
Cord Length (Feet) 25’ 50’ 100
Cord Size (AWG) 16 16 16
AWG = American Wire GaugeNOTE:
The charger should be mounted in the vertical
position or resting on its base during use.Do not
operate charger with a damaged cord or plug, which
could cause shorting and electric shock. If damaged, have
the charger replaced by an authorized serviceman.
Do not operate charger if it has received a sharp blow,
been dropped, or otherwise damaged in any way.
Take it to an authorized serviceman for electrical check
to determine if the charger is in good working order.
Do not disassemble charger. Take it to an authorized
serviceman when service or repair is required. Incorrect
reassembly may result in a risk of electric shock or fire.
Unplug charger from outlet before attempting any
maintenance or cleaning to reduce the risk of electric
shock.
Disconnect charger from the power supply when
not in use. This will reduce the risk of electric shock or
damage to the charger if metal items should fall into the
opening. It also will help prevent damage to the charger
during a power surge.
Risk of electric shock. Do not touch uninsulated
portion of output connector or uninsulated battery
terminal.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions also
to prevent misuse of the product and possible injury.
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Fail-
ure to follow all instructions listed below, may result in
electric shock, fire, and/or serious personal injury.
Before using charger, read all instructions and caution-
ary markings in this manual, on charger, battery, and
product using battery to prevent misuse of the products
and possible injury or damage.
WARNING:
Charge only RYOBI lithium-ion rechargeable battery
packs. Other types of batteries may burst, causing
personal injury or damage. For compatible battery packs
see tool/appliance/battery pack/charger correlation
supplement 987000-432.
Do not use charger outdoors or expose to wet or
damp conditions. Water entering charger will increase
the risk of electric shock.
WARNING:
Do not charge a battery that is wet or has been wet or
exposed to liquids.
Use of an attachment not recommended or sold by
the battery charger manufacturer may result in a risk
of fire, electric shock, or injury to persons. Following
this rule will reduce the risk of electric shock, re, or
serious personal injury.
Do not abuse cord or charger. Never use the cord to
carry the charger. Do not pull the charger cord rather than
the plug when disconnecting from receptacle. Damage
to the cord or charger could occur and create an electric
shock hazard. If cord or charger is damaged, have the
charger replaced by an authorized serviceman.
Make sure cord is located so that it will not be stepped
on, tripped over, come in contact with sharp edges
or moving parts or otherwise subjected to damage or
stress. This will reduce the risk of accidental falls, which
could cause injury, and damage to the cord, which could
result in electric shock.
Keep cord and charger from heat to prevent damage
to housing or internal parts.
Do not let gasoline, oils, petroleum-based prod-
ucts, etc. come in contact with plastic parts. They
contain chemicals that can damage, weaken, or
destroy plastic.


Produkt Specifikationer

Mærke: RYOBI
Kategori: Batterioplader
Model: PCG719

Har du brug for hjælp?

Hvis du har brug for hjælp til RYOBI PCG719 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Batterioplader RYOBI Manualer

RYOBI

RYOBI PCG719 Manual

5 Januar 2025
RYOBI

RYOBI RY36C17A Manual

2 Januar 2023
RYOBI

RYOBI One+ RC18627 Manual

20 December 2022

Batterioplader Manualer

Nyeste Batterioplader Manualer