Salter 9192 BK3R Manual

Salter Vægten 9192 BK3R

Læs gratis den danske manual til Salter 9192 BK3R (2 sider) i kategorien Vægten. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Salter 9192 BK3R, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

9192

MiBODY Salter MiBody is a range of connected devices to make weight and health

management easier. Measurements are sent wireless to your mobile device and can

be viewed using the free to download MiBody App. Trends can be tracked over time

and the measurements explained with healthy/recommended ranges. The results are

stored on your personal mobile device and are private unless you choose to share

your achievements.

MiBody should be used in addition with and not as a substitute to professional

medical guidance. If you are concerned about any aspect of your health please seek

professional medical guidance.

HOW DOES THIS SALTER SCALE WORK? This Salter scale uses BIA (Bio Impedance

Analysis) technology which passes a tiny electrical impulse through the body to

determine fat from lean tissue, the electrical impulse cannot be felt and is perfectly

safe. Contact with the body is made via a conductive ﬁlm on the platform of the scale.

This method simultaneously calculates your personal weight, body fat, total body

water, BMI, Basal Metabolic Rate, bone mass and muscle mass, giving you a more

accurate reading of your overall health and ﬁtness. This scale stores the personal

data of up to 8 users. As well as being an analyser scale, this scale can be used as a

conventional scale.

PREPARING YOUR SCALE 1. Open the battery compartment on the scale underside.

2. Remove isolating tab from beneath the battery (if ﬁtted) or insert batteries

observing the polarity signs (+ and -) inside the battery compartment. Close 3.

the battery compartment. Select kg, st or lb weight mode by the switch on the 4.

underside of the scale. For use on carpet remove the non-slip pads from the 5.

scales feet and attach enclosed carpet feet. Position scale on a ﬁrm ﬂat surface.6.

MiBODY APP Before using your device for the ﬁrst time: Download and install 1.

the Salter MiBody App from the App store. Use keyword search terms “Salter” or

“MiBody”. Turn Bluetooth “On” in the “Settings” menu of your mobile device.2.

3. Open the MiBody App and follow the on screen instructions to set up your user

account.

PAIRING DEVICES

1. Turn Bluetooth “On” in the “Settings” menu of your mobile device.

2. Open the MiBody App.

3. Press the button.

4. Press “Add Device”.

5. Press the scale to turn on the scale.

6. The App should automatically ﬁnd the scale. If not, just press the “ ” to ﬁnd the

scale.

7. Once found, Select the user number you wish to pair. Touch the button to ﬁnish.OK

8. If pairing is successful, the user number will ﬂash and cycle through the user

details on the scale.

9. If pairing is unsuccessful will be displayed.

10. The scale will automatically switch o.

11. Repeat procedure for each user and each mobile device.

Note: Each user number can only be paired with one mobile device. Results will be

sent to the paired device only.

INITIALISING YOUR SCALE 1. Press the platform centre and remove your foot.

2. 0.0 ‘ ’ will be displayed. The scale will switch o and is now ready for use.3.

This initialisation process must be repeated if the scale is moved.

At all other times step straight on the scale.

WEIGHT READING ONLY This scale features our convenient step-on operation. Once

initialised the scale can be operated by simply stepping straight on the platform – no

more waiting! Step on and stand very still while the scale computes your weight.1.

2. Your weight is displayed. Step o. Your weight will be displayed for a few 3.

seconds. The scale will switch o.4.

PERSONAL DATA ENTRY

1. Press the platform centre and remove your foot.

2. Press the button.

3. While the user number is ﬂashing, select a user number by pressing the or

buttons. Press the button to conﬁrm your selection.

4. The height display will ﬂash.

Press or as necessary to set your height, then press the button.

5. The age display will ﬂash.

Press or as necessary to set your age, then press the button.

6. The male or female symbol will ﬂash. Press or to select male/female/male

athlete/female athlete, then press the button.

Athlete Mode:

An athlete is deﬁned as a person who is involved in intense physical activity

of approximately 12 hours per week and who has a resting heart rate of

approximately 60 beats per minute or less.

7. The display will show your settings, then switch o. The memory is set.

8. Repeat procedure for a second user, or to change user details.

Note: To update or overwrite the memorised data, follow the same procedure,

making changes as required.

WEIGHT & BODY FAT READINGS

1. Position scale on a ﬁrm ﬂat surface.

2. Press the platform centre and remove your foot.

3. Press the button.

4. Whilst the user number is ﬂashing select your user number by pressing the

or buttons.

5. Wait while the display reconﬁrms your personal data then shows a zero reading.

6. When zero is displayed, with bare feet, step onto the platform and stand still.

IMPÉDAN CEMÈTRE • KÖRPER-ANALYSE-WAAGE • BÁSCULA ANALIZADORA DEL CUERPO • PESAPERSONE RILEVA-GRASSO

BALANÇA DE ANÁLISE CORPORAL • KROPPSANALYSEVEKT • LICHAAMSANALYSE WEEGSCHAAL

KEHON KOOSTUMUKSEN ANALYYSIVAAKA • KROPPSANALYSVÅG • KROPSANALYSEVÆGT • TESTZSÍRANALIZÁTOROS MÉRLEG

VÁHA PRO ANALÝZU TĚLA • VÜCUT ANALİZ TARTISI • ΖΥΓΑΡΙΑ ΜΕ ΑΝΑΛΥΤΗ ΣΩΜΑΤΟΣ • ВЕСЫ-АНАЛИЗАТОР

WAGA BODY ANALYSER • OSOBNÁ VÁHA S ANALYZÁTOROM

BODY ANALYSER SCALE

Instructions and Guarantee

7. Your weight, body fat % total body water % and BMR are displayed followed by

your muscle mass, bone mass and BMI.

8. If the user number is paired with a mobile device will be displayed and the

data will be sent wirelessly to your mobile device.

9. If the device is out of range or the App is closed will be displayed and the data

will be saved on the scale and transferred next time the scale is used.

10. The scale will switch o.

Produkt Specifikationer

Mærke:	Salter
Kategori:	Vægten
Model:	9192 BK3R

Har du brug for hjælp?

Hvis du har brug for hjælp til Salter 9192 BK3R stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vægten Salter Manualer

Salter 9193 BK3R Manual

12 Januar 2025

Salter 9221 BK3R Manual

6 September 2024

Salter 9113 GY3R Manual

6 September 2024

Salter 9192 BK3R Manual

6 September 2024

Salter 9113 SV3R Manual

6 September 2024

Salter SA 9193 GN3R Manual

21 August 2024

Salter SA 9216 WD3R Manual

21 August 2024

Salter 9500 Manual

20 August 2024

Salter BAMBOU Manual

19 August 2024

Salter 9206 SVWH3R Manual

19 August 2024

Vægten Manualer

Nyeste Vægten Manualer

Kern PCD 300-3 Manual

1 April 2025

Kern FCE 3K-3A Manual

30 Marts 2025

Kern TEFS 500-2-A Manual

30 Marts 2025

Kern MPL 200K-1P Manual

30 Marts 2025

Kern TGC 500-1S05 Manual

29 Marts 2025

PCE Instruments PCE-BSK 5100 Manual

28 Marts 2025

PCE Instruments PCE-PB 150N Manual

14 Marts 2025

PCE Instruments PCE-BSH 10000 Manual

14 Marts 2025

PCE Instruments PCE-MA 202 Manual

14 Marts 2025

PCE Instruments PCE-PCS 6 Manual

14 Marts 2025