Sani-Lav ES2-501L Manual
Læs gratis den danske manual til Sani-Lav ES2-501L (9 sider) i kategorien Vask. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Sani-Lav ES2-501L, eller vil du spørge andre brugere om produktet?
Side 1/9
1
A C O R B AT T E R Y P O W E R E D
S I N K W I T H E L E C T R O N I C S E N S O R
Operating Manual for Hands-Free Floor Mount Stainless Steel Sink
AC Models ES2-501L and ES2-501L-0.5
Battery Models ESB2-501L and ESB2-501L-0.5
of Domestic and Foreign Parts
Columbia does not recommend use with harsh chemicals.
Product Compliance
NSF/ANSI 2 Food Equipment, NSF/ANSI 372 Lead-Free Compliant, ASME A112.18.1
2
A C O R B AT T E R Y P O W E R E D
COLUMBIA SPECIFICATIONS
S I N K W I T H E L E C T R O N I C S E N S O R
800.626.2117 columbiasinks.com info@columbiasinks.com
©2021 Columbia Products
Parts List
(1) Sink bowl
(1) Pedestal base
(6) Nuts and washers to attach bowl to pedestal base
(1) AC or battery powered sensor faucet assembly
(1) Strainer assembly with basket
(1) Mixing check valve
Installation Instructions
Step 1
1. Install strainer assembly.
2. Attach bowl to pedestal base by slipping bolts on bowl through openings on pedestal base as
shown in illustration A.
3. Tighten the 6 nuts to the threaded bolts under bowl. Do not over-tighten.
Step 2
1. Install faucets to the sink following the instructions provided with sensor unit.
2. Attach supply tube with elbow to back of faucet.
3. Install mixing check valve and compression fitting to control box of each sensor faucet.
Step 3
1. Place sink at the desired location.
2. Mark the floor where the four holes are at the pedestal base as shown in illustration B.
3. Drill holes as required for mounting hardware (Hardware not included).
Step 4
1. Secure sink to floor.
2. Connect waste line to strainer assembly.
1. Mount sensor control box at desired location on wall.
2. Connect power line from sensor to control box.
3. Attach supply tube from faucet to control box.
4. Connect hot and cold water from the source to mixing check valve.
5. Remove aerator from the spout and flush water system. (see step 7 sensor installation
instructions)
6. Check connections for leaks.
7. Replace aerator onto the spout.
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds),
Lead, and Phthalates (DEHP) which are known to the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
NOTE: Lead content originates from Brass components in valves and faucets and is certied under
NSF/ANSI 372 as containing less than 0.25% lead in wetted surfaces.
Notice for California Consumers
Tools Required
Tape measure
Adjustable wrench
Drill motor and drill bits
Pipe wrench
Level
Safety glasses
Screw drivers: phillips and standard
Pencil
Socket wrench
Go to for more information on replacement parts and installation videos.columbiasinks.com
Illustration A
Illustration B
Produkt Specifikationer
| Mærke: | Sani-Lav |
| Kategori: | Vask |
| Model: | ES2-501L |
Har du brug for hjælp?
Hvis du har brug for hjælp til Sani-Lav ES2-501L stil et spørgsmål nedenfor, og andre brugere vil svare dig
Vask Sani-Lav Manualer
3 Marts 2025
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
Vask Manualer
- Artusi
- Blaupunkt
- Caple
- Concept
- Hendi
- Franke
- Shaws
- Tot Mate
- BLANCO
- Eagle Group
- Foster
- Rangemaster
- Advance Tabco
- Laveo
- Kuchinox
Nyeste Vask Manualer
3 Marts 2025
1 Januar 2025
30 December 2025
30 December 2025
28 December 2024
28 December 2024
28 December 2024
27 December 2024
27 December 2024
27 December 2024