Sani-Lav ESB2-607L Manual
Læs nedenfor 📖 manual på dansk for Sani-Lav ESB2-607L (9 sider) i kategorien Vask. Denne guide var nyttig for 3 personer og blev bedømt med 4.1 stjerner i gennemsnit af 2 brugere
Side 1/9
1
A C O R B AT T E R Y P O W E R E D
S I N K W I T H E L E C T R O N I C S E N S O R
Operating Manual for Hands-Free Wall Mount Stainless Steel Sink
AC Models and ES2-607L ES2-607L-0.5
Battery Models and ESB2-607L ESB2-607L-0.5
of Domestic and Foreign Parts
Columbia does not recommend use with harsh chemicals.
Product Compliance
NSF/ANSI 2 Food Equipment, NSF/ANSI 372 Lead-Free Compliant, ASME A112.18.1
2
COLUMBIA SPECIFICATIONS
A C O R B AT T E R Y P O W E R E D
S I N K W I T H E L E C T R O N I C S E N S O R
800.626.2117 columbiasinks.com info@columbiasinks.com
©2021 Columbia Products
Installation Instructions
Step 1
1. Establish sink location on the wall.
2. Determine desired height for the top of the backsplash from finished floor and draw a level
line which will be the top edge of the wall mounting bracket.
3. Hold the wall mounting bracket against the wall and mark the wall where the holes are. Drill
holes and secure bracket to the wall as shown in illustration A. Screws are not provided.
4. Position the sink onto wall bracket.
5. Mark holes for fastening side mounting brackets as shown in illustration B.
6. Remove sink from the wall bracket.
7. Drill holes in wall for securing sink to wall. Screws are not provided.
Step 2
1. Install strainer assembly.
2. Install faucets to the sink following the instructions provided with sensor unit.
3. Attach supply tube with elbow to back of faucet.
4. Install mixing check valve and compression fitting to control box of each sensor faucet.
Step 3
1. Position the sink onto wall bracket and secure to wall.
2. Connect waste line to strainer assembly.
3. Mount sensor control box at desired location on wall.
4. Connect power line from sensor to control box.
5. Attach supply tube from faucet to control box.
6. Connect hot and cold water from the source to mixing check valve.
7. Remove aerator from the spout assemblies and flush water system. (see step 7 sensor
installation instructions)
8. Check connections for leaks.
9. Replace aerator onto the spout.
10. We recommend sealing top of backsplash to wall as shown in illustration C.
Parts List
(1) Wall mount sink
(1) AC or Battery powered sensor faucet assembly
(1) Wall-mounting bracket
(1) Mixing check valve
(1) Strainer assembly with basket
Tools Required
Tape measure
Adjustable wrench
Drill motor and drill bits
Pipe wrench
Level
Safety glasses
Screw drivers: phillips and standard
Pencil
Socket wrench
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds),
Lead, and Phthalates (DEHP) which are known to the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
NOTE: Lead content originates from Brass components in valves and faucets and is certied under
NSF/ANSI 372 as containing less than 0.25% lead in wetted surfaces.
Notice for California Consumers
Go to for more information on replacement parts and installation videos.columbiasinks.com
Illustration A
Illustration B
Illustration C
Produkt Specifikationer
| Mærke: | Sani-Lav |
| Kategori: | Vask |
| Model: | ESB2-607L |
Har du brug for hjælp?
Hvis du har brug for hjælp til Sani-Lav ESB2-607L stil et spørgsmål nedenfor, og andre brugere vil svare dig
Vask Sani-Lav Manualer
3 Marts 2025
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
Vask Manualer
- Vask Kuchinox
- Vask Eagle Group
- Vask Shaws
- Vask Smeg
- Vask Artusi
- Vask Hotpoint Ariston
- Vask Foster
- Vask Rangemaster
- Vask Tot Mate
- Vask Saro
- Vask Atosa
- Vask Kernau
- Vask Teka
- Vask Oliveri
- Vask CDA
Nyeste Vask Manualer
3 Marts 2025
1 Januar 2025
30 December 2025
30 December 2025
28 December 2024
28 December 2024
28 December 2024
27 December 2024
27 December 2024
27 December 2024