Kohler Gilford K-12700 Manual

Kohler Vask Gilford K-12700

Læs gratis den danske manual til Kohler Gilford K-12700 (8 sider) i kategorien Vask. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Kohler Gilford K-12700, eller vil du spørge andre brugere om produktet?

Side 1/8
1017834-2-A
Kohler Co.
Español, Página 3
Français, Page 5
BEFORE YOU BEGIN
Observe all local plumbing
and building codes.
Inspect the waste and supply
tubing; replace if necessary.
reinforcement to support at
least 300 lbs. (136.1 kg).
Prior to installation, unpack the
new sink and inspect it for
damage. Return the sink to its
protective carton until you are
ready to install it.
INSTALL THE NEW SINK
Rough-in the supplies and
drain according to the
roughing-in information
packed with the sink.
Install the wall brackets to the
reinforced wall according to
the roughing-in information
packed with the sink. Level
the wall brackets.
From the underside, install a
toggle bolt, metal washer,
rubber washer, and toggle to
each of the rear bracket
slots.
Position a washer over each
front bracket slot. Position
the tie bar across the front of
the wall bracket sections so it
rests on both washers.
Secure the tie bar in place
from the underside with a
bolt, nut, and washer through
each front bracket slot.
Toggle
Rubber
Washer
Wall
Bracket
Washer
Tie Bar
Washer
Bolt
Nut
Toggle Bolt
Metal
Washer
GILFORD VITREOUS
CHINA SCRUB-UP SINK
INSTALLATION
INSTRUCTIONS


Produkt Specifikationer

Mærke: Kohler
Kategori: Vask
Model: Gilford K-12700

Har du brug for hjælp?

Hvis du har brug for hjælp til Kohler Gilford K-12700 stil et spørgsmål nedenfor, og andre brugere vil svare dig