Saris Tailgate Pad Manual

Saris Ikke kategoriseret Tailgate Pad

Læs gratis den danske manual til Saris Tailgate Pad (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Saris Tailgate Pad, eller vil du spørge andre brugere om produktet?

Side 1/4
LOT CODE
Saris Tailgate Pad #TGP100, TGP200
Assembly Instructions | Instrucciones de montaje | Instructions d’assemblage
LOT CODE
REGISTER YOUR PRODUCT
https://saris.com/pages/product-registration
ASSEMBLY/INSTALLATION VIDEO
https://saris.com/pages/videos
WHAT’S IN THE BOX
LETTER QTY PART DESCRIPTION
B 1 Installation Tool
C 2 Down Tube Protective Film Bottom
D 2 Down Tube Protective Film Top
E 4 Tailgate Lower Protective Film
FOLLOW INSTRUCTIONS
SPECIFICATIONS
TGP100 Small
5 bike max (51-1/8” minimum required inner
truck bed clearance)
TGP200 Large
6 bike max (59” minimum required inner truck
bed clearance)
TGP100 Small TGP200 Large
A
C
B
D E
INSTALL TAILGATE PAD:
Open tailgate. Place tailgate pad (A) on tailgate, with the white line on the pad
positioned on the inner edge of the tailgate, as shown.
1
Place attachment straps into the installation tool (B), as shown.
Feed the tool with the strap under your tailgate.
Note: Tailgate may need to be adjusted to partially open in order to feed tool and
strap through.
2
3
Pull the strap from the installation tool and thread it through the corresponding
buckle on the inner side of the tailgate pad. Then, thread the strap over the top
buckle ladder and leave the strap loose.
Repeat steps 2–4 with the remaining 3 straps.
Evenly tighten all four straps.
4
5
Outside
Inside
Top
A
B


Produkt Specifikationer

Mærke: Saris
Kategori: Ikke kategoriseret
Model: Tailgate Pad

Har du brug for hjælp?

Hvis du har brug for hjælp til Saris Tailgate Pad stil et spørgsmål nedenfor, og andre brugere vil svare dig