Saturn ST-HC7386 Manual

Saturn Neglesaks ST-HC7386

Læs gratis den danske manual til Saturn ST-HC7386 (20 sider) i kategorien Neglesaks. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Saturn ST-HC7386, eller vil du spørge andre brugere om produktet?

Side 1/20
1
ST-HC7386
HAIR CLIPPER
МАШИНКА ДЛЯ СТРИЖКИ
МАШИНКА ДЛЯ СТРИЖКИ
3
GB
HAIR CLIPPER
Dear Buyer!
We congratulate you on having
bought the device under trade
name “Saturn. We are sure that
our devices will become faithful
and reliable assistance in your
housekeeping.
Avoid extreme temperature
changes. Rapid temperature
change (e.g. when the unit is
moved from freezing temperature
to a warm room) may cause
condensation inside the unit and a
malfunction when it is switched
on. In this case leave the unit at
room temperature for at least 1.5
hours before switching it on.
If the unit has been in transit,
leave it indoors for at least 1.5
hours before starting operation.
READ ALL INSTRUCTIONS BEFORE
USING AND SAVE THESE
INSTRUCTIONS
BLADE ALIGNMENT
Your clippers were carefully
examined to ensure, that the blades
were oiled and aligned before leaving
our factory.
Blades must be realigned, if they
have been removed for cleaning or
replacement.
To realign the blades, simply
match the upper and bottom blades
teeth up, point for point.
(End of top blade teeth should be
approximately 1.2mm back from
bottom blade; compare your clipper
blades with the sketch).
If blade alignment is incorrect,
add a few drops of oil to the blades,
turn clipper on for a few moments,
turn off and unplug. Loosen screws
slightly and adjust. Tighten screws
after blade is aligned.


Produkt Specifikationer

Mærke: Saturn
Kategori: Neglesaks
Model: ST-HC7386

Har du brug for hjælp?

Hvis du har brug for hjælp til Saturn ST-HC7386 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Neglesaks Saturn Manualer

Neglesaks Manualer

Nyeste Neglesaks Manualer