Sauter HMO Manual

Sauter Måling HMO

Læs gratis den danske manual til Sauter HMO (17 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Sauter HMO, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/17

Sauter GmbH

Ziegelei 1

D-72336 Balingen

e-mail: info@kern-sohn.com

Phone : +49-[0]7433- 9933-0

Fax: +49-[0]7433- - 9933 149

Internet: www.sauter.eu

Instruction manual mobile Leeb

hardness tester

SAUTER HMO

Version 2.0

04/2020

HMO- -e- BA 2020

PROFESSIONAL MEASURING

2 HMO- -e- BA 2020

SAUTER HMO

V. 2.0 04/2020

Instruction manual mobile Leeb hardness tester

Thank you for purchasing the mobile digital Leeb impact hardness tester from

SAUTER. We hope that you will be very satised with the high quality of this device

and its extensive functionality. For any questions, wishes and suggestions we are at

your disposal.

Table of contents:

1 Before commissioning .................................................................................. 3

2 Introduction .................................................................................................... 3

2.1 Measuring principle .................................................................................................................. 3

2.2 Structure .................................................................................................................................... 4

2.3 Technical data ........................................................................................................................... 5

2.4 Area of application ................................................................................................................... 5

3 Test procedure ............................................................................................... 6

3.1 Preparation of the device 6........................................................................................................

3.2 Preparation of the sample ....................................................................................................... 6

3.3 Test execution .......................................................................................................................... 8

3.4 Browsing ................................................................................................................................... 8

3.5 Print 9............................................................................................................................................

4 Setup ............................................................................................................... 9

4.1 Settings in the main mask ....................................................................................................... 9

4.2 Menu settings ......................................................................................................................... 10

5 Care and maintenance ................................................................................. 14

5.1 Periodic maintenance ............................................................................................................ 14

5.2 Store ......................................................................................................................................... 14