SAUTVS ZP-YJ-030503-096 Manual

SAUTVS Ikke kategoriseret ZP-YJ-030503-096

Læs gratis den danske manual til SAUTVS ZP-YJ-030503-096 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om SAUTVS ZP-YJ-030503-096, eller vil du spørge andre brugere om produktet?

Side 1/3
UNDER
DASH
SPEAKER
PODS
FOR
POLARIS
RZR
PRO
ZP-YJ-030503-096
BEFORE YOU BEGIN
Read these instructions and check to be sure all parts and tools are accounted for. Please retain
these installation instructions for future reference.
IMPORTANT
Your SPEAKER PODS KIT is exclusively designed for your vehicle. Please read the installation
instructions thoroughly before beginning. Installation is easier if the vehicle is clean and free of
debris.
Note: Shift vehicle transmission into “PARK”.
Turn key to “OFF” position and remove from
vehicle.
INSTALLATION INSTRUCTIONS
Product and accessories:
1. Remove the audio protection net from the
original vehicle.
2. Option A: Install the speaker ( specified for
the original vehicle ) on the new speaker holder.
As shown in picture:
Specified loudspeaker for original vehicle
UNDER
DASH
SPEAKER
PODS
FOR
POLARIS
RZR
PRO
ZP-YJ-030503-096
Option B: Get 4 little brackets from the
accessory package, and mount them on the
speaker holder at first, then secure the 5”
speaker to the holder by screws.
3. Install the assembled speaker and holder
back to the original position of the vehicle and
finally install the protective net, finish the
installation of the other side as the same
steps. As shown in picture:
Note: This step requires the customer to
connect the loudspeaker to the power amplifier.


Produkt Specifikationer

Mærke: SAUTVS
Kategori: Ikke kategoriseret
Model: ZP-YJ-030503-096

Har du brug for hjælp?

Hvis du har brug for hjælp til SAUTVS ZP-YJ-030503-096 stil et spørgsmål nedenfor, og andre brugere vil svare dig