Schlage WCO100 Manual


Læs gratis den danske manual til Schlage WCO100 (6 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Schlage WCO100, eller vil du spørge andre brugere om produktet?

Side 1/6
WCO100 Camera
WCO100 Camera MAC ID
Twelve (12) characters
Lens
PowerLED
PIRSensor
Microphone
_________________ (not used)
L i g h t
S e n s o r
P o w e r
P o r t
Reset Button
Antenna
MAC ID
E t h e r n e t
P o r t
Final position,
upright
Package Contents:
Outdoor Camera
External Antenna
6-foot Power Adapter
Swivel Connector
Mounting Stand
Mounting Base
Mounting Screws (3)
Ethernet Cable (with water sealing cap)
6-foot Power Extension Cable (with water sealing cap)
1Attach antenna to the camera
Turn the antenna clockwise on the antenna mount.
The antenna should be in an upright position for
best signal reception.
2Locate MAC ID, Ethernet and Power.
Write the MAC ID in the box at the top of this page for later reference.
DO NOT plug in Ethernet or power before enrolling!
3Log into your account at www.mynexia.com
Camera can be used only with Nexia Home Intelligence system.
Account must be active before continuing. See nexiahome.com for more information.
Enroll the Camera
a. Make sure Ethernet and power are NOT plugged into camera before you begin.
b. On www.mynexia.com, click the Cameras tab.
c. Click the Add Camera button.
d. Follow the on-screen instructions.
e. Click on Edit Camera Settings to complete wireless setup.


Produkt Specifikationer

Mærke: Schlage
Kategori: Overvågningskamera
Model: WCO100

Har du brug for hjælp?

Hvis du har brug for hjælp til Schlage WCO100 stil et spørgsmål nedenfor, og andre brugere vil svare dig