SE Electronics DM3 Manual

SE Electronics Ikke kategoriseret DM3

Læs gratis den danske manual til SE Electronics DM3 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 10 anmeldelser. Har du et spørgsmål om SE Electronics DM3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

DM3

Use r Ma nu al

Thank you!

Thank you for choosing the sE Electronics DM3. We

hope you enjoy using it as much as we’ve enjoyed

designing and building it for you.

The DM3 is an active DI, employing the well-established

DYNAMITE technology of our DM1 and DM2 inline

preamps. Its Ultra Hi-Z input, massive headroom and

dedicated Class-A output-buffer amplifier ensure that

you’ll always get the best out of your instrument. The

DM3 can be directly connected to any Phantom-powered

XLR input, with no need for an extra cable. Its compact

size allows it to easily fit into your pocket, so the sound

quality you're looking for is always at your disposal.

Please note: The DM3 requires +48V Phantom power for

operation.

Ultra -Z inputHi

The DM3’s ultra-high input impedance preserves the

individual sonic character of your instrument without any

compromise. Instruments with passive pickups (i.e.

electric guitars, stringed instruments with piezo pickups,

vintage high-impedance microphones) will especially

benefit from the DM3’s stunningly high input impedance

of 10 MOhms.

Attenuation pad

For high-output instruments (i.e. electric guitars with

active pickups, keyboards, drum machines) a three-

position attenuation switch allows you to reduce the

signal by 15 or 30 dB. This is useful the signal level is if

too high for the input of your preamp or mixer.

Please note: The switch is embedded in a recess to

prevent unintended access; you will need a miniature

screwdriver to change its settings.

Ground lift switch

The DM3 features a dedicated three-position ground lift

switch. In the position, the ground lift is deactivated. Off

If you are experiencing unwanted hum or buzz, a ground

loop might be causing this. Turning the switch to the On

position will break any such loops, greatly reducing

noise.

Produkt Specifikationer

Mærke:	SE Electronics
Kategori:	Ikke kategoriseret
Model:	DM3

Har du brug for hjælp?

Hvis du har brug for hjælp til SE Electronics DM3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret SE Electronics Manualer

SE Electronics V Clamp Manual

21 August 2024

SE Electronics DM3 Manual

19 August 2024

SE Electronics guitaRF Manual

19 August 2024

SE Electronics The Reflexion Filter Manual

13 August 2024

SE Electronics Reflexion Filter Space Manual

13 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Aiphone GT-4ZP Manual

15 Juni 2025

Moulinex Secanto DJAB41 Manual

15 Juni 2025

Blodgett Invoq 201E Manual

15 Juni 2025

Vocopro FIELD-QUAD-H Manual

15 Juni 2025

ORNO OR-DB-MK-175P Manual

15 Juni 2025

Milwaukee M12 HSFSM Manual

15 Juni 2025

Berkel Suprema Salumeria PES370 Manual

15 Juni 2025

Bugaboo Butterfly 2 car seat adapters Manual

15 Juni 2025

ORNO OR-CR-278 Manual

15 Juni 2025

Wahoo BLUE SC Manual

15 Juni 2025