SEADA GM9 Manual

SEADA Processor GM9

Læs gratis den danske manual til SEADA GM9 (2 sider) i kategorien Processor. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om SEADA GM9, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

GM9 Quick Start Manual

SD-MA-032 V01

Note

1. Do not fix the device to any surface which is a heat source to avoid over heating

2. Do not cover the surface or ventilation grills of the device to avoid over heating

1. Verify the package contents

Please verify the package contents against the list below

1. GM9 Controller 1

2. Power Adapter 1

3. Ethernet Cable 1

4. GM9 Quick Start Manual 1

5. RS232 RJ45 to Serial Port Cable 1

6. Download Guide Card 1

If any of the items in the packing list are missing, please contact your reseller.

2. Set up the GM9

Power up the GM9 controller and connect the input and outputs to correct devices.

GM9

❶ ❷ ❸ ❹ ❺ ❻❼ ❽ ❾

1 – Power Switch 4 – HDMI Input 7 – Ethernet RJ45 Port

2 – Power Connector 5 – USB 3.0 Ports 8 - Dipswitches

3 – HDMI Outputs 6 – RS232 RJ45 Port 9 – RCA Audio Output

Figure 1

3. Connect through IP in ‘Device’

The default IP address for GM9 controller is 192.168.1.236. Users need to change the IP address of

control PC to the same IP group of GM9.

• Change the ‘Obtain an IP address automatically’ to ‘Use the following IP address’ to set up a static

IP address of TCP/IPv4 in Ethernet Properties

➢ IP address: any address between 192.168.1.2 and 192.168.1.253 except the address

which has been taken by the GM9

➢ Subnet mask: 255.255.255.0, Default Gateway: 192.168.1.254

• Once the control PC IP address having been set up, connect PC to the LAN RJ45 port of the GM9

controllers via a network cable and then press the button (or Connection -> Player

Connection Settings) and wait for the scan to complete. Select the device and press

connect

GM9 Quick Start Manual

SD-MA-032 V01

4. Configuration

To configure the GM9, either press the System Setup button or navigate to Configuration - > System

Settings.

• Select the correct size screen from the Output

Selection dropdown menu at the top of the

screen. If you can’t find the monitor make and

model, you can click on Edit and create a new one with your dimensions.

• Add the number of screens you want to the video wall by

double clicking on the screens in the Add Outputs section.

Keep in mind that the GM9 can support up to 2 video

walls. After you are done press Add Outputs to Wall

• Once you add the screens make sure you rearrange them

to the specifications of your video wall from the

Row and Column section below and click

Rearrange.

• You can adjust the angle of the screens by selecting the degrees you want to rotate your screens at and

pressing + for clockwise and – for anti-clockwise. If you

want to fine tune and adjust in smaller increments. Press

“<” and “>” for increments of 1 degree

5. Displaying a signal

There are 2 ways to display a signal on the GM9 – through the built-in media player

or through the input.

• To play something through the built-in media player, navigate to the Video

Source Settings (Video -> Video Source Settings) or

• Upload a video by selecting “Send video file” to send one file or “Send video

folder” to

• send a whole folder. After you have uploaded your video just press the

button “Play video on screen”

• If you want to display the local input instead of the built-in media player,

then all you need to do is connect your source to the input port of the GM9

and use one of the many frames from the software. If you would not like to

have a frame and simply display the input, you can select the “invisible

frame” (fourth frame from top to bottom). To display a frame simply drag

and drop from the frame selection to the video wall. To delete a frame select

it and press “delete” on your keyboard or you can use the buttons on the toolbar

This quick start guide provides basic instructions for setting up SEADA GM9 Creative Video Wall controllers. For

additional information about how to use the controllers, please refer to the GM9 User Guide (SD-MA-031), which

is available on www.seada.co.uk.

Produkt Specifikationer

Mærke:	SEADA
Kategori:	Processor
Model:	GM9

Har du brug for hjælp?

Hvis du har brug for hjælp til SEADA GM9 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Processor SEADA Manualer

1 September 2024

1 September 2024

1 September 2024

1 September 2024

1 September 2024

1 September 2024

1 September 2024

1 September 2024

1 September 2024

SEADA G44-HDMI Manual

1 September 2024

Processor Manualer

Nyeste Processor Manualer

BSS Audio Soundweb London BLU-BOB2 Manual

14 September 2025

Mackie SP260 Manual

14 September 2025

BSS Audio Soundweb London BLU-BOB1 Manual

14 September 2025

BSS Audio Soundweb London BLU-USB Manual

14 September 2025

Amiko MiraX HiS-1000 Manual

13 September 2025

Ibm 46M1079 Manual

12 September 2025

Ibm Intel Xeon E5506 Manual

12 September 2025

DAP-Audio DCP-24 MKII Manual

12 September 2025

DAP-Audio ACU-100 Manual

12 September 2025

QSC Core 5200 Manual

11 September 2025