Seiko DM50 Manual

Seiko Ikke kategoriseret DM50

Læs gratis den danske manual til Seiko DM50 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Seiko DM50, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Power button

Press it to turn on and off the metronome and to change over the

displays.

Tempo LED display

It visually represents the tempo of the metronome with the

flashing of the LED.

Selector button

Press it to select the setting item from tempo, beat/rhythm and

volume.

Liquid crystal display

It indicates the tempo, beat/rhythm and volume settings you have

made and the current time.

DOWN button

UP button

Press the buttons to change the setting of the item selected by

pressing the selector button .

Clip

Use it to attach the metronome to a music stand or musical score.

Speaker

It gives out the tempo sound of the metronome.

Reset switch

Push it when the battery is replaced with a new one or when the

metronome does not work properly.

HOW TO USE

●The battery included with the metronome is a monitor battery, and

its life may be shorter than the specified period.

●Changeover of displays

POWER OFF

display

METRONOME

display

TIME

display

TIME SETTING

display

Press the power

button .

Keep the power

button pressed. Keep the

selector

button

pressed.

Press the

power button .

Keep the power

button pressed.

Press the

power button .

When the metronome is turned off (when the display is blank),

pressing the power button will turn it on. Another press of the

button will turn it off again.

●Tempo setting

1. Press the selector button to set “ ” mark at the bottom of

the display to “TEMPO”. The tempo setting mode will be

shown on the display.

2. Press UP or DOWN button to set the desired tempo.

With each press, the tempo is increased or decreased by one,

respectively. The digits move quickly by 10 tempos if the

button is kept pressed.

●Volume setting

1. Press the selector button to set “ ” mark at the bottom of

the display to “VOLUME”. The volume setting mode will be

shown on the display.

2. Press UP or DOWN button to set the volume to the

desired level.

With each press, the volume level changes one by one in the

following order.

High ⇔ No sound ⇔ Low ⇔ Mid

⇒

MEMORY BACKUP FUNCTION

Even after the metronome is turned off, the settings you have made

are stored in memory and will not be erased.

If the battery is replaced with a new one or if the reset switch is

pushed, the metronome will return to the following initial settings.

1. Tempo [120]

2. Beat/rhythm [0]

3. Volume [High]

●Time setting

Keep the power button pressed when the power is turned off

or when the metronome display is shown. The time display will be

shown. Follow the procedure below to set the current time.

1. While in the time mode, keep the selector button pressed

to show the time setting display.

2. Press the selector button to select the digits to be adjusted

from hours and minutes. Press UP or DOWN button to

set the desired time.

3. After the time adjustment is completed, press the power

button to return to the time display.

* To turn the power off, press the power button again.

* If you decide not to use the metronome for a long time, it is recommended that

the power is turned off to save battery energy.

DIGITAL METRONOME DM50

INSTRUCTION MANUAL

NAME AND OPERATION OF PARTS

SET

30 31 ⇔ ⇔ • • • • • ⇔ ⇔ 119 120 121 ⇔ ⇔ • • • • • ⇔249 ⇔250

⇒

●Beat/rhythm setting

1. Press the selector button to set “ ” mark at the bottom of

the display to “BEAT”. The beat/rhythm setting mode will be

shown on the display.

2. Press UP or DOWN button to set the desired beat/

rhythm.

With each press, the beat/rhythm changes one by one in the

following order.

0 ⇔ 1 ⇔ 2 ⇔ 3 ⇔ 4 ⇔ 5 ⇔ 6 ⇔ 7 ⇔ ⇔ ⇔

⇒

RESE T

BATTERY CHANGE

●When the battery nears its end, the tempo LED display and the

liquid crystal display become dim, and the sound becomes weak.

In that case, replace the battery with a new one immediately.

Otherwise, the metronome may work improperly.

* Be sure to set the (+) an (–) terminals of the battery properly. Otherwise, a

malfunction will result.

* When the battery is replaced with a new one, tempo, beat/rhythm and volume

settings you have made are all erased. Set them as desired before using the

metronome.

* When disposing of the old battery, observe the regulations of the authorities

concerned.

* Keep the old battery and the battery hatch beyond the reach of children. If a

child swallows either of them, consult the doctor immediately.

●How to replace the battery

1. Be sure to press the power button

to turn off the metronome.

2. Loosen and remove the three

screws fixing the rear cover.

3. Open the rear cover.

4. Remove the battery clamp screw,

and take out the old battery.

5. Set the new battery inside the white

circle, checking that the (+) and (–)

terminals are properly set.

6. Set the battery clamp, and tighten

the screw to fix it securely.

7. Close the rear cover, and tighten

the three screws to fix it.

8. Pinch open the clip, and push the

reset switch with a tip of a ball-

point pen or something that has a

sharpened tip.

SPECIFICATIONS

1. Display : Liquid crystal display

2. Speaker : Piezoelectric speaker

3. Tempo range : 30 ~ 250 times/min.

4. Beat/rhythm range : 0 ~ 7, , ,

5. Volume : 4-level volume control (no sound, low, mid and high)

6. Accuracy : ±3%

7. Power supply : Lithium battery CR2025, 1 piece

8. Overall dimensions : 40 (W) x 57 (H) x 35 (D) mm

9. Weight : Approx. 30 g (including battery)

* The design and specifications are subject to change without prior notice for product

improvement.

Screws

Battery clamp

screw

Battery clamp

Reset switch

Be sure to perform this resetting procedure. Otherwise, the

metronome may work improperly. In case the metronome

does not work properly while in use, also push the reset switch

to return it to normal.

Produkt Specifikationer

Mærke:	Seiko
Kategori:	Ikke kategoriseret
Model:	DM50

Har du brug for hjælp?

Hvis du har brug for hjælp til Seiko DM50 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Seiko Manualer

2 April 2025

19 August 2024

15 August 2024

10 August 2024

10 August 2024

10 August 2024

9 August 2024

9 August 2024

6 August 2024

5 Februar 2023

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Adj Event Bar Q4 Manual

14 August 2025

Bartscher A114003 Manual

14 August 2025

Swann SRNHD-888MSDWB2 Manual

14 August 2025

Adj Flashback 4 Manual

14 August 2025

Panduit FO6CB Manual

14 August 2025

Renkforce RF-WAT-300 Manual

14 August 2025

American Audio ETR 1000R Manual

14 August 2025

Swann SWIFI-MPRST Manual

14 August 2025

American Audio SENSE8 Manual

14 August 2025

Adj Vortex 1200 Manual

14 August 2025