Important safety instructions
READ CAREFULLY AND STORE FOR FUTURE USE.
■This appliance may be used by children 8 years of age and older and by persons
with physical or mental impairments or by inexperienced persons, if they are
properly supervised or have been informed about how to use the appliance in
asafe manner and understand the potential dangers. Children must not play with
the appliance. Cleaning and maintenance performed by the user must not be
performed by unsupervised children.
■If the power cord is damaged, it must be replaced by the manufacturer, its service
technician or by a similarly qualified person, as this will prevent a dangerous
situation from arising. It is forbidden to use the appliance if it has a damaged
power cord.
■Children younger than 3 years of age should be prevented from accessing the
appliance unless they are under constant supervision.
■Children from 3 to 8 years of age must only turn this appliance on/off under the
condition that it is located or installed in its intended normal operating position
and that they are under supervision or were informed about the safe operation of
the appliance and understand the potential hazards. Children from 3 to 8 years of
age must not insert the plug into the power socket, regulate or clean the appliance
or carry out maintenance performed by the user.
ATTENTION:
Certain parts of this product may become very hot and cause burns.
Special attention should be paid when children and handicapped people
are present.
WARNING:
Do not cover.
To prevent overheating, do not cover the convection heater.
■This appliance must not be located directly underneath apower socket.
■Do not use this appliance in the direct vicinity of abath, shower or swimming pool.
■Children must not play with the appliance.
■This appliance is designed for household use only.
■This appliance is not intended for outdoor use or for commercial purposes such as,
for example use at aconstruction site.
■Before connecting the appliance to apower socket, check that the nominal voltage
on its rating label matches the voltage in the power socket to which you wish to
connect it.
