Sennheiser MKE 2 digital Manual

Sennheiser Mikrofon MKE 2 digital

Læs gratis den danske manual til Sennheiser MKE 2 digital (2 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 28 anmeldelser. Har du et spørgsmål om Sennheiser MKE 2 digital, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Sennheiser electronic GmbH & Co. KG

Am Labor 1, 30900 Wedemark, Germany

www.sennheiser.com

MKE 2 digital

Quick Start Guide

3B Adjusting Input Level with

Apogee Maestro App

XOpen Apogee Maestro app and choose Sennheiser

MKE 2 digital from the main menu.

XTap the button to hear your micro-Input Monitoring

phone input.

1 Turn the knob to increase or decre-Gain Adjustment

ase the microphone input to the desired level. Small

adjustments can also be made by pressing either the

“–“or “+“ buttons 3.

Tips for Setting Input Level

The best way to do this is to monitor the loudest

sound you will be recording and adjust the input

gain so the input metering remains green, yellow or

orange and not red. If the microphone input meter

becomes red when recording, the input is too high

and the recording will be distorted.

4 Select an preset. The presets use Input Processing

onboard DSP processing to shape the sound with EQ,

compression and limiting to achieve the most natural

or unique result. Select or leave as is to No Processing

bypass this feature.

4 Recording

Note:

It is recommended that you set your iOS device to

airplane mode to prevent any incoming calls from

disrupting your recordings.

XOpen Apogee MetaRecorder or any other Core Audio

compatible recording App.

MKE 2 digital should be automatically detected and

selected as the input device.

XIf you haven’t already done so, connect headphones to

the built-in output on your iOS device and enable input

monitoring in the recording App.

XTap the button Record 1 in the App to begin.

For more info on Apogee MetaRecorder

and other compatible apps,

visit www.apogeedigital.com/apps

Attachment of the Microphone

25 cm (10 inches)

3C Apple Watch Remote Control

MetaRecorder offers an Apple Watch App to remotely

operate these controls.

1 Tap to operate

transport controls.

2 Force tap to toggle

favorite status.

3 Tap to add

a marker.

4 Tap to reset

max. peak display.

5 Tap “+” or “–“

to adjust input

gain.

Printed in USA, Publ. 04/15, 560098/A06

In the Box

1 MKE 2 digital microphone

1 Clip

1 Metal wind screen

Overview

ClipWind Screen

1 Sennheiser MKE 2 microphone capsule

2 Apple MFi certified Lightning connector

3 Apogee PureDigital Enhanced A/D conversion circuitry

1. This metal wind screen

reduces the wind noise by a

maximum of 20 dB.

2. You may further reduce

the wind noise by 10 dB by

means of the foam-net wind

screen. For thin clothes (e.g. silk),

please use the outer hole

where the clip‘s contact pres-

sure is the highest.

1Installing the App

System Requirements

• iPhone 6, iPhone 6 plus, iPhone 5s, iPhone 5c

iPhone 5

• iPad Air 2, iPad Air, iPad (4th generation)

• iPad mini 3, iPad mini 2, iPad mini

• iPod touch (5th generation)

• iOS version: 8.0 and later

• Apogee MetaRecorder App, Apogee Maestro App or

any Core Audio compatible App on iOS

−Apogee MetaRecorder allows you to record audio

and control your MKE 2 digital microphone.

−Apogee Maestro allows you to control your MKE

2 digital microphone.

This is not an App for recording.

Apogee MetaRecorder Apogee Maestro

XInstall Apogee MetaRecorder or Apogee Maestro from

Apple’s App Store for iOS.

Note:

It is possible to record with MKE 2 digital using any

Core Audio compatible App.

90°

2 Connecting to your iOS Device

XConnect MKE 2 digital to the

Lightning port on your iPhone,

iPad or iPod touch.

By default, you will not hear

MKE 2 digital until input monitoring

is enabled in an App.

XConnect headphones to the built-in analog output on

your iPhone, iPad or iPod touch.

This is necessary to avoid feedback when monitoring

your microphone input.

3A Preparing the Recording

MKE 2 digital’s input gain can be controlled from either

of Apogee’s two iOS Apps or from any recording App that

supports Core Audio input control.

Adjusting Input Level with Apogee

MetaRecorder App

1 Open Apogee MetaRecorder and tap the tab.Rec/Play

2 Confirm that appears just below the MKE 2 digital

microphone icon.

3 Tap the microphone icon to reveal the input

level slider.

4 Drag the input slider with your finger to adjust the

microphone input to the desired level.

5 Tap the tab and enable input monitoringSettings 6.

1 Foam windshield

1 Carrying pouch

1 Quick Start Guide

Produkt Specifikationer

Mærke:	Sennheiser
Kategori:	Mikrofon
Model:	MKE 2 digital
Type:	Halsmikrofon/knaphulsmikrofon
Bredde:	- mm
Dybde:	- mm
Højde:	- mm
Brugervejledning:	Ja
Produktfarve:	Sort
Pakkedybde:	178 mm
Pakkebredde:	128 mm
Pakkehøjde:	35 mm
Driftstemperatur (T-T):	0 - 50 °C
Forbindelsesteknologi:	Ledningsført
Kabellængde:	1.6 m
Diameter:	4.8 mm
Enhedsgrænseflade:	Lightning
Bæretaske:	Ja
Hovedkassen højde (udvendigt):	228 mm
Hovedkassens længde (udvendigt):	404 mm
Hovedkassens bruttovægt (udvendigt):	2146.94 g
Hovedkassens bredde (udvendigt):	304 mm
Oprindelsesland:	USA
Mikrofon frekvens:	20 - 20000 Hz
Mikrofonretningstype:	Omniretningsbestemt
Mikrofon sensitivitet:	80 dB
Mikrofon vægt:	29 g
Kompatible produkter:	iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5, iPad Air 2, iPad Air, iPad (4th generation), iPad mini 3, iPad mini 2, iPad mini, iPod touch (5th generation)
Lydtryksniveau note:	95 - 130 dB
Udgående forstærkningsfaktor:	0 - 35 dB
Produkter pr. hovedkasse (udvendigt):	20 stk
Forsendelseskassens bruttovægt (indvendig):	83 g