Senseair eSENSE Disp Manual

Senseair CO2 Sensor eSENSE Disp

Læs gratis den danske manual til Senseair eSENSE Disp (4 sider) i kategorien CO2 Sensor. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Senseair eSENSE Disp, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
Installation Manual
eSENSE (Disp)
CO2 sensor
eSENSE
eSENSE Disp
General
The IAQ-sensor product eSENSE
(sensor for wall mounting) is designed to measure carbon dioxide
(CO2) in rooms. Option TR is prepared for temperature measurements by the resistive temperature
probe mounted by the user. The temperature probe is potential free (floating). Option Disp, displays
the measured CO2 value in ppm (parts-per-million) on the LCD.
The units are designed for connecting to Direct Digital Control (DDC) with 0─10V or
2─10V signal inputs. The two parallel signal outputs OUT1 (0─10V) and OUT2 (2─10V or 4─20mA)
give linear signal voltages or currents corresponding to the measuring range.
The output OUT2 also indicates the status by setting the output voltage to 1V or the output current to
2mA when the sensor self-diagnostics detects any error.
To open the wall mounted housing
NOTE:
ESD sensitive
product.
Use ESD protection
equipment.
Figure 1. Closed housing seen from above. The housing is opened by pressing a screw driver on the
locking hook. The locking hook is then released.
Electrical connections
The power supply has to be connected to and . is considered as system ground.
NOTE:
The same ground reference has to be used for the eSENSE unit and for the control system!
Terminal
Function
Electrical data
Remarks
Settings of
eSENSE
ext range 10000ppm
Power (+)
Power ground
(-)
24VAC/DC+
(±20%), 2W
24VAC/DC-
Out(1)
Out(2)
Analogue
output 1 (+)
Analogue
output 2 (+)
0─10VDC
2.0─10.0VDC
or
4.0─20.0mA
0.9─1.6VDC
or
1.5─2.5mA
0VDC
or
0mA
0─10000 ppm CO2
0─10000 ppm CO2
Table I. Connections of the main terminal of eSENSE
~
+
~
+
Press here to open.

Produkt Specifikationer

Mærke: Senseair
Kategori: CO2 Sensor
Model: eSENSE Disp

Har du brug for hjælp?

Hvis du har brug for hjælp til Senseair eSENSE Disp stil et spørgsmål nedenfor, og andre brugere vil svare dig


CO2 Sensor Senseair Manualer

Senseair

Senseair eSENSE Ind Disp Manual

24 August 2024
Senseair

Senseair tSENSE VAV Disp Manual

22 August 2024
Senseair

Senseair tSENSE Disp Manual

21 August 2024
Senseair

Senseair aSENSE Duct Manual

18 August 2024
Senseair

Senseair Explora PM2.5 Manual

10 August 2024
Senseair

Senseair aSENSE VAV Manual

9 August 2024
Senseair

Senseair eSENSE Disp Manual

7 August 2024
Senseair

Senseair aSENSE GH Manual

4 August 2024
Senseair

Senseair aSENSE M III Manual

3 August 2024
Senseair

Senseair eSENSE II Manual

2 August 2024

CO2 Sensor Manualer

Nyeste CO2 Sensor Manualer

Zehnder

Zehnder CO2-Sensor CO2 Sensor Manual

2 September 2024
Brink Climate

Brink Climate CO2- sensor Manual

25 August 2024
Duco

Duco CO2-sensor Z-wave Manual

25 August 2024
EnviSense

EnviSense CO2 Monitor Manual

24 August 2024
Duco

Duco RH sensor Z-wave Manual

24 August 2024
Duco

Duco Comfort System - Plus Wired Manual

24 August 2024
Duco

Duco RF-C bedieningsschakelaar Manual

23 August 2024
Bresser

Bresser 7004040 CO2 Air Quality Monitor Manual

21 August 2024
Orcon

Orcon CO2 ruimtesensor 15RF Manual

18 August 2024
TechGrow

TechGrow T-1 Manual

10 August 2024