Sevenoak SK-A7C1 Manual

Sevenoak Ikke kategoriseret SK-A7C1

Læs gratis den danske manual til Sevenoak SK-A7C1 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 71 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 36 anmeldelser. Har du et spørgsmål om Sevenoak SK-A7C1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Features:

■　Form-ﬁtting cage

■　Aluminum construction

■　Comfortable wood grip

■　Removable top hand grip

■　Quick release plate

■　Built in 1/4” and 3/8” mounting points

■　Built in cold shoes

■　A pair of 15mm standard rods

■　Full access to camera’s controls, buttons, memory slot

and battery

SK-A7C1 is a portable aluminum cage kit built for the Sony A7,

A7S, A7R, A7 II, A7R II, A7S II which adds protection, stability

and mounting options to the camera. It includes form ﬁtting

camera cage, wood grip, top hand grip, micro HDMI adapter

cable, HDMI plug protector, quick release base plate, cold shoes,

1/4” and 3/8” mounting points etc. The form ﬁtting camera cage

allows full access to the camera’s controls, buttons, battery and

SD card slot. The cold shoes, 1/4” and 3/8” mounting points

allows you to mount dierent accessories.

The HDMI plug protector frees you from worrying about

wearing out or damaging the micro HDMI port by repeatedly

plugging or replugging a micro HDMI cable into your camera

body. It also helps to prevent your HDMI cable from accidentally

coming unplugged during a shoot which is particularly important

when using an external monitor or recorder.

The comfortable wood grip and removable top hand grip enable

users to switch from one to the other easily for dierent

shooting requirement. The built in 1/4” and 3/8” mounting

points as well as two cold shoes on the top hand grip enables

users to mount various kinds of useful accessories.

The cage also comes with quick release base plate and a pair of

15mm standard rods that allows you to remove and remount

the camera from the rods easily and quickly. With 1/4” and 3/8”

mounting points on the quick release plate, the cage can be

easily mounted onto or removed from a tripod, rig or other

device. Warnings

Limited One-year Warranty

Sevenoak provides a limited warranty that this product is free

from defects in materials and workmanship to the original

purchaser under normal use for a period of one (1) year from the

original purchase date or thirty (30) days after replacement (the

“Warranty Period”), whichever occurs later. Our responsibility

with respect to this limited warranty shall be limited solely to

repair or replacement, at its option, of any product which fails

during normal consumer use.

To obtain warranty coverage during the Warranty period,

contact your place of purchase (”Seller”) to obtain a return

merchandise authorization (”RMA”) number, and return to Seller

the defective product along with proof of purchase and the RMA

number.

This warranty does not extend to damage or failure which

results from misuse, neglect, accident, alternation, abuse,

improper installation or maintenance. EXCEPT AS PROVIDED

HEREIN, SEVENOAK MAKES NEITHER ANY EXPRESS WARRAN-

TIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT

LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. This warranty provides

you with speciﬁc legal rights, and you may also have additional

rights which vary from state to state.

■　Please read and follow these instructions, and keep

this manual in a safe place.

■　Handle the unit with care.

■　Clean the unit with a soft, dry cloth.

■　Use only parts provided by the manufacturer.

■　Make sure everything is secure before proceeding.

■　Make sure the item is intact and that there are no

missing parts.

■　Do not exceed the maximum load capacity.

■　All photos are for illustrative purposes only.

Components:

1. Top hand grip

2. Top hand grip connector

3. Main body

4. 1/4” camera locking screw

5. Quick release plate

6. HDMI plug protector

7. Micro HDMI adapter cable

8. Base plate

9. 2*15mm standard rods

10. M4 Screws

11. Allen Key

12. Key for camera locking screw

SK-A7C1

Cage Kit for Sony

A7, A7S, A7R ,A7 II , A7R II, A7S II

2016 Sevenoak lnc.Visit us on the

web at www.sevenoak.biz

Instruction Manual:

Step 1:

Use the included Allen key and three M4*6 screws to install the

top hand grip and the top hand grip connector as shown in the

below picture, ensure the screws are tightened.

Step 2:

Use the Allen key and two M4*8 screws to attach the top hand

grip to he main body as shown in the following picture, ensure

the screws are tightened.

Step 5:

Attach the HDMI plug protector to the main body as shown in

the following picture, use two M4*10 screws and Allen key to

lock the HDMI plug protector, make sure the screws are

securely fastened.

Step 3:

Turn the cage and camera upside down, put the camera into the

cage, make sure the camera locking screw point is right under

the locking point on the cage (see following picture), use the

1/4” screw to lock the camera, you may need to use a coin to

tighten the screw, make sure the camera is securely fastened.

Step 4:

Use two M4*8 screw to lock the quick release plate onto the

main body as shown in the below picture, tighten the screws

with the Allen key.

Step 6:

Insert the HDMI D (Micro) plug through the plug protector and into

the camera’s HDMI D (Micro) port. Secure the cable by tightening

the two plug protector screws.

Fit the HDMI plug through the gap in the plug protector and lock it

into place by tightening the plug protector screws.

Step 7:

Insert two 15mm rods into the base plate, ﬁx the rods at a

proper position by tighten the screws on both sides of the base

plate.

Step 8:

Loosen the locking screw on the base plate, put the quick

release plate onto the base plate, lock the quick release plate by

tighting the locking screw on the base plate, make sure the

screw is securely fastened.

Now the basic installation is completed, it is ready for shooting.

You can add other accessories to this kit according to your

requirement. You can hold the wood grip or top hand grip while

shooting, or you can mount on tripod. After shooting, remember

to remove the camera from the cage.

Produkt Specifikationer

Mærke:	Sevenoak
Kategori:	Ikke kategoriseret
Model:	SK-A7C1
Produktfarve:	Aluminium, Wood colour
Materiale:	Aluminium
Kapabilitet:	Sony A7, A7S, A7R, A7 II, A7R II, A7S II, A9
Maksimal vægtkapacitet:	- kg
Håndtag, materiale:	Træ
Tilslutningsgevind:	1/4, 3/8 "