Seville Classics Mesh Utility Shoe Rack 3 Tier Manual

Seville Classics Ikke kategoriseret Mesh Utility Shoe Rack 3 Tier

Læs gratis den danske manual til Seville Classics Mesh Utility Shoe Rack 3 Tier (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Seville Classics Mesh Utility Shoe Rack 3 Tier, eller vil du spørge andre brugere om produktet?

Side 1/2
STEPS TO STACK THE RACK
1. Build another rack following the instructions above.
However, do not install the LEVELING FEET (B) on the second
(top) unit.
______________________________________________________
2. Screw the STACKING PINS (G) into the legs of the top unit.
Remove all CAPS (C) from the original (base) unit.
______________________________________________________
3. Lift the top unit up and onto the base unit, lining up the pins
with the holes at the four top corners so that they can be
inserted into each other. Be sure everything is in alignment and
then press down firmly on the top unit so that it sits tightly into
and onto the base unit.
WEIGHT CAPACITY PER SHELF: 13.6 kg/ 30 lb
ASSEMBLY INSTRUCTIONS
3-TIER ADJUSTABLE SHOE RACK (Model No. 15890)
www.sevilleclassics.com
©2015 Seville Classics, Inc.
NOTE: Drawing shows 2 units
stacked vertically. Do not exceed
maximum height of 2 stacked units.
WARNING: Do not sit on the rack. Do
not drop heavy items on the rack.
Place heavier items on the lower
shelves and lighter ones on the top
shelves. Do not move the rack while
loaded.
G
TF150617


Produkt Specifikationer

Mærke: Seville Classics
Kategori: Ikke kategoriseret
Model: Mesh Utility Shoe Rack 3 Tier
Type: Åbn
Bredde: 673 mm
Dybde: 307 mm
Højde: 485 mm
Vægt: 3175 g
Produktfarve: Sølv
Materiale: Metal
Antal hylder: 4 hylder
Spejl: Ingen

Har du brug for hjælp?

Hvis du har brug for hjælp til Seville Classics Mesh Utility Shoe Rack 3 Tier stil et spørgsmål nedenfor, og andre brugere vil svare dig