Seville Classics SHE05813BZ Manual

Seville Classics Ikke kategoriseret SHE05813BZ

Læs gratis den danske manual til Seville Classics SHE05813BZ (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 46 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 23.5 anmeldelser. Har du et spørgsmål om Seville Classics SHE05813BZ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Step 7:

Fasten a pair of slip sleeves at the top of each

pole and slide the Top Shelf (I) over the poles

until secure.

Step 8:

Repeat steps 1-7 to assemble the second

tower.

Note: Make sure both sets of rod brackets are

installed at the same height on both towers.

Step 9:

Place the U-Sleeves (H) in the center of each

rod bracket. Install the Expandable Rod (J) by

inserting the Screws (for rod) (G) through the

u-sleeves on both ends of each rod. Tighten the

screws on both ends of each expandable rod

with a Phillips screwdriver. Place Shelf Liners

(K) on the small shelves.

Weight Capacity:

100 lbs per shelf

125 lbs on expandable rod (not extended)

50 lbs on expandable rod (extended)

TF120919

Expandable Closet Organizer

Model No. 05813

Assembly Instructions

Customer Service

Tel (310) 533-3800

Tel (800) 323-5565

Fax (310) 533-3899

Monday - Friday 8:30am to 4:30pm PST

Seville Classics, Inc.

Torrance, CA 90501 USA

www.sevilleclassics.com

Please read and save these instructions

Step 1:

Screw the Leveling Feet (D) into 4 Bottom

Poles (B).

Step 2:

On the bottom of each pole, fasten a pair of

Slip Sleeves (C) around the grooves at the

desired shelf height.

Step 3:

Slide a Small Shelf (E) over the top of 4

bottom poles until it rests snugly over the slip

sleeves. Repeat steps 2 and 3 by attaching

slip sleeves and another small shelf at the

desired height.

Tip: It is easier to do this step with the unit on

its side. If necessary, use a rubber mallet to

further secure the shelf.

Step 4:

Once the unit is stable and upright, screw 4

Top Poles (A) into the bottom poles.

Step 5:

Determine the desired height to install the Rod

Bracket (F). Fasten a pair of slip sleeves

around the grooves on two poles and slide the

rod bracket over the two poles.

Step 6:

Install the 3rd and 4th small shelf at the

desired height. Repeat step 5 to add another

rod bracket.

Note: Leave enough room above the rod

bracket to install the Top Shelf (I).

2 pcs

Top Shelves

2 pcs

Expandable Rod

8 pcs

Shelf Liners

K Assembly Tools

Required

Phillips Screwdriver

8 pcs

Small Shelves

4 pcs

Rod Bracket

4 pcs

Screws (for rod)

4 pcs

U-Sleeve

G H

8 pcs

Top Poles

8 pcs

Bottom Poles

48 pairs

Slip Sleeves

8 pcs

Leveling Feet

C D

Plastic cap (top)

Threaded (bottom)

Please make sure you have all the parts before starting assembly.

Produkt Specifikationer

Mærke:	Seville Classics
Kategori:	Ikke kategoriseret
Model:	SHE05813BZ
Bredde:	2108.2 mm
Dybde:	355.6 mm
Højde:	1828.8 mm
Vægt:	24040 g
Ramme, materiale:	Metal
Produkttype:	Dragtstativ
Sammenfoldet, bredde:	1473.2 mm
Ramme, farve:	Rustfrit stål