Siemens QAW20 Manual

Siemens Termostat QAW20

Læs gratis den danske manual til Siemens QAW20 (8 sider) i kategorien Termostat. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Siemens QAW20, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

2812

SYNERGYR®

Room Unit QAW20

Programmable room unit for operation of the SYNERGYR® control and billing

system. The unit's setting knob and economy button make it very easy to control

the supply of heat. 7-day heating program, adjustable temperature setpoints,

selection of operating mode and info button.

Use

QAW20 is the room unit for reference room-compensated temperature control in con-

nection with the

• WRI80 control and heat meter interface

• WRV… control and heat cost allocation valve

For the field of use of the SYNERGYR® system, refer to Data Sheets N2800 to N2803

(System Overview).

Functions

The QAW20 is a combination of room temperature sensor and operator and control unit

for use with the control and heat meter interface or the control and heat cost allocation

valve. Using a digital 2-wire interface, it delivers the setpoint for temperature control by

the WRI80 or WRV… . This can be accomplished via a 7-day heating program or by

manual action. The QAW20 also serves as a display unit for the WRI80 or WRV… and

other metering devices connected to SYNERGYR®.

CE1N2812en

13.08.2010 Building Technologies

Operation All operating elements that are required for normal operation are easily accessible:

• Operating mode buttons

• Info button for the actual meter readings

• Economy button

• Setpoint readjustment knob

Programming To program and display specific values, a cover must be removed. The unit then

switches automatically to the programming level and the display shows the required

data:

• Temperatures and heating program

• Weekday and time of day

• Meter readings on the set day

• Holiday period

• Retrieval of standard values

Programming is made in 2 steps. First, the entry line is selected and then the respec-

tive value changed. Operating Instructions which explain all steps are located under the

cover. The programming level can be locked if these setting choices shall not be ac-

cessible.

Automatic operation

The heating program controls setpoint changeover. It can be temporarily over-

ridden by pressing the economy button. The overriding action then remains in

effect until the next heating program switching action occurs (refer to «Economy

button»).

Manual operation

The required room temperature is selected by pressing the economy button

(refer to “Economy button”).

Standby

The room temperature is maintained at a minimum level preselected either at the

central unit or the room unit.

Operating modes

2812Z11

AUTO

Each time the info button is pressed, the values

shown on the list below are displayed in successive

order. The selected display is maintained until the info

button is pressed again. Heating control continues to

operate independently of the selected display.

Info button

Time of day, room temperature

Weekday, time of day

Outside temperature*

% Heat consumption trend

Meter reading of space heating (heat consumption)

Meter reading of DHW*

Meter reading of gas*

Meter reading of electricity*

Meter reading of other meters*

* These displays appear only if the respective signal sources are connected

Note If several meters of the same type are used, a number appears in addition to the symbol.

2/8

Siemens Room unit QAW20 CE1N2812en

Building Technologies 13.08.2010

Produkt Specifikationer

Mærke:	Siemens
Kategori:	Termostat
Model:	QAW20

Har du brug for hjælp?

Hvis du har brug for hjælp til Siemens QAW20 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Termostat Siemens Manualer

Siemens QAF64 Manual

28 December 2024

Siemens RDG100T Manual

15 Oktober 2024

Siemens DESIGO RXA Manual

5 Oktober 2024

Siemens REV33 Manual

3 Oktober 2024

Siemens RAA31 Manual

16 September 2024

Siemens REV100 Manual

2 September 2024

Siemens Landis & Staefa REV22RF Manual

1 September 2024

Siemens RDG160T Manual

1 September 2024

Siemens RDF600KN Manual

30 August 2024

Siemens REV23M Manual

30 August 2024

Termostat Manualer

Nyeste Termostat Manualer

Carrier ComfortVu Manual

16 Juni 2025

Mainstreet Equipment GMC-12 Manual

15 Juni 2025

Honeywell RTH21B Manual

14 Juni 2025

Tado Wireless Temperature Sensor X Manual

9 Juni 2025

Fantini Cosmi CH123E Manual

26 Marts 2025

Netatmo Smart Radiator Valve Manual

26 Februar 2025

Netatmo Smart Thermostat Manual

26 Februar 2025

Rose LM TER-9 Manual

5 Februar 2025

Rose LM TH-H Manual

1 Februar 2025

Danfoss React M30x1.5 Manual

1 Februar 2025